Re: [PATCH 1/2] arm64: dts: qcom: sc8280xp-x13s: Enable HBR3 on external DPs

[Konrad Dybcio]

On 8/27/26 9:52 AM, Jens Glathe via B4 Relay wrote:
> From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
> 
> When no link frequencies are set, the msm/dp driver defaults to HBR2.
> Explicitly list the supported rates including HBR3 (8.1 Gbps) on both
> USB-C DisplayPort endpoints so high-resolution docks and monitors can
> train above 5.4 Gbps.
> 
> Signed-off-by: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad