[PATCH v2 02/15] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller

[Michal Wilczynski]

Add the dt-binding for the StarFive JH7110 Innosilicon HDMI controller
(DRM bridge).

This device is the second child of the starfive,jh7110-hdmi-subsystem node.
It consumes register access clocks (sys, mclk, bclk) from the voutcrg and
both the pixel clock (pclk) and the PHY from its hdmi_phy sibling.

Signed-off-by: Michal Wilczynski <m.wilczynski@xxxxxxxxxxx>
---
 .../starfive,jh7110-inno-hdmi-controller.yaml      | 109 +++++++++++++++++++++
 1 file changed, 109 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/starfive,jh7110-inno-hdmi-controller.yaml b/Documentation/devicetree/bindings/display/bridge/starfive,jh7110-inno-hdmi-controller.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..0e584e7b756e24e2f99a62daab3117bbf4b472b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/starfive,jh7110-inno-hdmi-controller.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/starfive,jh7110-inno-hdmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Innosilicon HDMI Controller
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@xxxxxxxxxxx>
+
+description:
+  The controller portion of the StarFive JH7110 INNO HDMI IP.
+
+properties:
+  compatible:
+    const: starfive,jh7110-inno-hdmi-controller
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: System clock for register access
+      - description: Module clock
+      - description: Bus clock
+      - description: Pixel clock from PHY
+
+  clock-names:
+    items:
+      - const: sys
+      - const: mclk
+      - const: bclk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: hdmi_tx
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: hdmi-phy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      A graph node with one input port and one output port.
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  # Shown as a child of the HDMI subsystem node; see
+  # Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-subsystem.yaml
+  # for the full node.
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    controller {
+        compatible = "starfive,jh7110-inno-hdmi-controller";
+        clocks = <&voutcrg JH7110_VOUTCLK_HDMI_TX_SYS>,
+                 <&voutcrg JH7110_VOUTCLK_HDMI_TX_MCLK>,
+                 <&voutcrg JH7110_VOUTCLK_HDMI_TX_BCLK>,
+                 <&hdmi_phy>;
+        clock-names = "sys", "mclk", "bclk", "pclk";
+        interrupts = <99>;
+        phys = <&hdmi_phy>;
+        phy-names = "hdmi-phy";
+        resets = <&voutcrg JH7110_VOUTRST_HDMI_TX_HDMI>;
+        reset-names = "hdmi_tx";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&dpu_out_dpi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
+        };
+    };
+
+...

-- 
2.34.1