Re: [PATCH v6 5/5] pinctrl: renesas: rzg2l: Add RZ/G3S support for selecting the I3C power source

[Geert Uytterhoeven]

On Thu, 3 Sept 2026 at 13:41, Claudiu Beznea
<claudiu.beznea+renesas@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> The Renesas RZ/G3S I3C pins can be powered at either 1.8V or 1.2V. The
> pin controller provides a register to select between these two options.
> Update the Renesas RZ/G2L pin controller driver to allow selecting the
> I3C power source on RZ/G3S SoC.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>
> Changes in v6:
> - used bit 23 to define PIN_CFG_IO_VMC_I3C
> - described the I3C power sources according to the new method; due
>   to this didn't collect the Wolfram's Tb tag.

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds