Re: [PATCH v3 3/3] Add socfpga devicetree for Draeger's M48 board.

[Dinh Nguyen]

On 9/9/26 06:15, Petko Manolov wrote:
> Signed-off-by: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
> ---
>   arch/arm/boot/dts/intel/socfpga/Makefile      |   1 +
>   .../socfpga/socfpga_cyclone5_draeger_m48.dts  | 129 ++++++++++++++++++
>   2 files changed, 130 insertions(+)
>   create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
>
> diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
> index 8df0976da01c..cdcea11abdfa 100644
> --- a/arch/arm/boot/dts/intel/socfpga/Makefile
> +++ b/arch/arm/boot/dts/intel/socfpga/Makefile
> @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
>   	socfpga_arria10_mercury_aa1_st1_emmc.dtb \
>   	socfpga_arria10_mercury_aa1_st1_qspi.dtb \
>   	socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \
> +	socfpga_cyclone5_draeger_m48.dtb \
>   	socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \
>   	socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \
>   	socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \
> diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
> new file mode 100644
> index 000000000000..6c5a8013d40c
> --- /dev/null
> +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + *  (C) Copyright 2020 Draeger and Licensors, info@xxxxxxxxxxx
> + */
> +#include "socfpga_cyclone5.dtsi"
> +
> +/ {
> +	model = "Draeger M48 Cyclone V SoC";
> +	compatible = "draeger,M48", "altr,socfpga-cyclone5", "altr,socfpga";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		name = "memory";
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +
> +		/* 1GB */

Stray comment?

> +	};
> +
> +	aliases {
> +		/* this allow the ethaddr uboot environmnet variable contents
> +		 * to be added to the gmac0 device tree blob.
> +		 */
> +		ethernet0 = &gmac0;
> +	};
> +
> +	soc {
> +		gpio3: gpio@ff202000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0xff202000 0x20>;
> +			status = "okay";
> +
> +			portd: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				snps,nr-gpios = <2>;
> +				reg = <0>;
> +				bank-name = "SYNC_I";

bank-name? I don't see it documented anywhere.


Dinh