[PATCH 1/2] regulator: mp886x: check get_voltage_sel() return value

[Jisheng Zhang]

The get_voltage_sel() can fail, resulting in negative error codes
stored in unsigned integers and corrupted state logic.

Fixes: 97be82880b61 ("regulator: add support for MP8869 regulator")
Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
Closes: https://sashiko.dev/#/patchset/20260901043123.5401-1-jszhang@xxxxxxxxxx?part=1
---
 drivers/regulator/mp886x.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c
index e0b62bc02a1e..bc25cba33c8b 100644
--- a/drivers/regulator/mp886x.c
+++ b/drivers/regulator/mp886x.c
@@ -256,6 +256,7 @@ static int mp886x_regulator_register(struct mp886x_device_info *di,
 {
 	struct regulator_desc *rdesc = &di->desc;
 	struct regulator_dev *rdev;
+	int sel;
 
 	rdesc->name = "mp886x-reg";
 	rdesc->supply_name = "vin";
@@ -277,7 +278,12 @@ static int mp886x_regulator_register(struct mp886x_device_info *di,
 	rdev = devm_regulator_register(di->dev, &di->desc, config);
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
-	di->sel = rdesc->ops->get_voltage_sel(rdev);
+
+	sel = rdesc->ops->get_voltage_sel(rdev);
+	if (sel < 0)
+		return sel;
+	di->sel = sel;
+
 	return 0;
 }
 
-- 
2.53.0