[PATCH] dt-bindings: leds: Use consistent indentation in the example
From: Krzysztof Kozlowski
Date: Sun Sep 13 2026 - 08:37:35 EST
Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ..."). Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
.../leds/backlight/lm3630a-backlight.yaml | 52 +++++++++----------
.../leds/backlight/lp855x-backlight.yaml | 18 +++----
.../bindings/leds/backlight/qcom-wled.yaml | 2 +-
.../bindings/leds/leds-consumer.yaml | 14 ++---
.../devicetree/bindings/leds/leds-lp50xx.yaml | 12 ++---
.../devicetree/bindings/leds/leds-lp5860.yaml | 12 ++---
.../devicetree/bindings/leds/nxp,pca963x.yaml | 24 ++++-----
7 files changed, 67 insertions(+), 67 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 3c9b4054ed9a..6393cbf3afdf 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -99,20 +99,20 @@ examples:
#size-cells = <0>;
led-controller@38 {
- compatible = "ti,lm3630a";
- reg = <0x38>;
- enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ compatible = "ti,lm3630a";
+ reg = <0x38>;
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- led@0 {
- reg = <0>;
- led-sources = <0 1>;
- label = "lcd-backlight";
- default-brightness = <200>;
- max-brightness = <255>;
- };
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <200>;
+ max-brightness = <255>;
+ };
};
};
- |
@@ -121,22 +121,22 @@ examples:
#size-cells = <0>;
led-controller@38 {
- compatible = "ti,lm3630a";
- reg = <0x38>;
+ compatible = "ti,lm3630a";
+ reg = <0x38>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- led@0 {
- reg = <0>;
- default-brightness = <150>;
- ti,linear-mapping-mode;
- };
+ led@0 {
+ reg = <0>;
+ default-brightness = <150>;
+ ti,linear-mapping-mode;
+ };
- led@1 {
- reg = <1>;
- default-brightness = <225>;
- ti,linear-mapping-mode;
- };
+ led@1 {
+ reg = <1>;
+ default-brightness = <225>;
+ ti,linear-mapping-mode;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
index 9416e1bfab92..2215ee1b2e5b 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
@@ -95,20 +95,20 @@ examples:
/* 4V OV, 4 output LED0 string enabled */
rom-14h {
- rom-addr = /bits/ 8 <0x14>;
- rom-val = /bits/ 8 <0xcf>;
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
};
/* Heavy smoothing, 24ms ramp time step */
rom-15h {
- rom-addr = /bits/ 8 <0x15>;
- rom-val = /bits/ 8 <0xc7>;
+ rom-addr = /bits/ 8 <0x15>;
+ rom-val = /bits/ 8 <0xc7>;
};
/* 4 output LED1 string enabled */
rom-19h {
- rom-addr = /bits/ 8 <0x19>;
- rom-val = /bits/ 8 <0x0f>;
+ rom-addr = /bits/ 8 <0x19>;
+ rom-val = /bits/ 8 <0x0f>;
};
};
};
@@ -125,7 +125,7 @@ examples:
dev-ctrl = /bits/ 8 <0x85>;
init-brt = /bits/ 8 <0x10>;
};
- };
+ };
- |
i2c {
#address-cells = <1>;
@@ -142,8 +142,8 @@ examples:
/* 4V OV, 4 output LED string enabled */
rom-14h {
- rom-addr = /bits/ 8 <0x14>;
- rom-val = /bits/ 8 <0xcf>;
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
};
};
};
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index a54448cfdb38..bca00b774bb0 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -280,4 +280,4 @@ examples:
qcom,ovp = <29>;
qcom,num-strings = <2>;
qcom,enabled-strings = <0 1>;
- };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-consumer.yaml b/Documentation/devicetree/bindings/leds/leds-consumer.yaml
index fe6a0faa1d3b..b4065c9733a5 100644
--- a/Documentation/devicetree/bindings/leds/leds-consumer.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-consumer.yaml
@@ -53,15 +53,15 @@ examples:
};
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- v4l2_node: camera@36 {
- reg = <0x36>;
+ v4l2_node: camera@36 {
+ reg = <0x36>;
- leds = <&privacy_led>;
- led-names = "privacy";
- };
+ leds = <&privacy_led>;
+ led-names = "privacy";
+ };
};
...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index 23f809906ba7..85182ad7ad09 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -121,18 +121,18 @@ examples:
function = LED_FUNCTION_CHARGING;
led@0 {
- reg = <0x0>;
- color = <LED_COLOR_ID_RED>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
};
led@1 {
- reg = <0x1>;
- color = <LED_COLOR_ID_GREEN>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_GREEN>;
};
led@2 {
- reg = <0x2>;
- color = <LED_COLOR_ID_BLUE>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_BLUE>;
};
};
diff --git a/Documentation/devicetree/bindings/leds/leds-lp5860.yaml b/Documentation/devicetree/bindings/leds/leds-lp5860.yaml
index 0e88c71c2d39..710fec3738ed 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp5860.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp5860.yaml
@@ -100,18 +100,18 @@ examples:
color = <LED_COLOR_ID_RGB>;
led@0 {
- reg = <0x0>;
- color = <LED_COLOR_ID_RED>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
};
led@1 {
- reg = <0x1>;
- color = <LED_COLOR_ID_GREEN>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_GREEN>;
};
led@2 {
- reg = <0x2>;
- color = <LED_COLOR_ID_BLUE>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_BLUE>;
};
};
};
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
index a16ca11f630b..dac316741b9b 100644
--- a/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
+++ b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
@@ -164,27 +164,27 @@ examples:
#size-cells = <0>;
led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
};
led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
};
led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
};
led@3 {
- reg = <3>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_STATUS;
+ reg = <3>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
};
};
};
--
2.53.0