Re: [PATCH 23/34] arm64: dts: qcom: sar2130p: Move PCIe phy and GPIOs to root port node

[Konrad Dybcio]

On 9/10/26 3:29 PM, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys and phy-names from the controller to
> the existing pcieport0 and newly labeled pcie1_port0, allowing
> board-level overrides. Move perst-gpios/wake-gpios from the &pcie0
> controller override to &pcieport0 in the board file, renaming
> perst-gpios to reset-gpios to match the binding used in the root
> port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad