Re: [PATCH] docs: iio: backend: use literal block for commands

[Andy Shevchenko]

On Tue, Sep 15, 2026 at 10:49:24PM -0700, Randy Dunlap wrote:
> Use literal blocks for 'cat' and 'echo' commands to separate them from
> the surrounding text. Otherwise the lines run together, without any
> clear break before or after the commands.

...

> -		Directly access the registers of backend Y. Typical usage is:
> +		Directly access the registers of backend Y. Typical usage is::
>  
> -		Reading address 0x50
> -		echo 0x50 > direct_reg_access
> -		cat direct_reg_access
> +		  Reading address 0x50

Then make it a shell comment style

		  # Reading address 0x50

> +		  echo 0x50 > direct_reg_access
> +		  cat direct_reg_access
>  
> -		Writing address 0x50
> -		echo 0x50 0x3 > direct_reg_access
> -		//readback address 0x50
> -		cat direct_reg_access

> +		  Writing address 0x50

Ditto.

> +		  echo 0x50 0x3 > direct_reg_access
> +		  //readback address 0x50

And correct the style of this altogether.

> +		  cat direct_reg_access

-- 
With Best Regards,
Andy Shevchenko