[PATCH v9 05/10] iio: accel: mma8452: Only apply trigger type when not set by firmware

[Esben Haabendal]

Instead of unconditionally overriding the trigger type, it is better to
only apply a default when no trigger type is set by firmware. This should
be reasonably backward compatible, and should only potentially cause
problems if systems exist where firmware specifies an incorrect trigger
type. With a bit of luck, there are no such systems.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
Signed-off-by: Esben Haabendal <esben@xxxxxxxxxx>
---
 drivers/iio/accel/mma8452.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 8d70fe89110c..72b4ab32775a 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1669,9 +1669,16 @@ static int mma8452_probe(struct i2c_client *client)
 		goto trigger_cleanup;
 
 	if (client->irq) {
+		unsigned long irq_flags;
+
+		irq_flags = irq_get_trigger_type(client->irq);
+		if (irq_flags == IRQ_TYPE_NONE) {
+			dev_info(dev, "invalid irq type, setting default active low\n");
+			irq_flags = IRQF_TRIGGER_LOW;
+		}
+		irq_flags |= IRQF_ONESHOT;
 		ret = request_threaded_irq(client->irq, NULL, mma8452_interrupt,
-					   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-					   client->name, indio_dev);
+					   irq_flags, client->name, indio_dev);
 		if (ret)
 			goto buffer_cleanup;
 	}

-- 
2.55.0