[PATCH v4 2/4] arm64: dts: qcom: shikra-cqs-evk: Enable display and add ili7807s panel

[Nabige Aala]

From: Arpit Saini <arpit.saini@xxxxxxxxxxxxxxxx>

Enable the Shikra MDSS display subsystem on the Qualcomm Shikra CQS EVK
board and add the DLC0697 MIPI DSI display panel node.

Signed-off-by: Arpit Saini <arpit.saini@xxxxxxxxxxxxxxxx>
Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 118 ++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
index e62ba5aef71f..a9067b710a22 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
@@ -21,6 +21,78 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	lcd_bias: regulator-lcd-bias {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_bias";
+		gpio = <&tlmm 151 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&lcd_bias_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_disp_n: regulator-vreg-disp-n {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_disp_n";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		vin-supply = <&lcd_bias>;
+	};
+
+	vreg_disp_p: regulator-vreg-disp-p {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_disp_p";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		vin-supply = <&lcd_bias>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm4125_l5>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "dlc,dlc0697", "ilitek,ili7807s";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+
+		vddi-supply = <&pm4125_l15>;
+		avdd-supply = <&vreg_disp_p>;
+		avee-supply = <&vreg_disp_n>;
+
+		pinctrl-0 = <&panel_rst_n &panel_te_pin &panel_bl_en>;
+		pinctrl-1 = <&panel_rst_n_suspend &panel_bl_en_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm4125_l5 {
+	/* DSI VDDA - must be at NOM voltage for PHY PLL lock */
+	regulator-min-microvolt = <1232000>;
+	regulator-max-microvolt = <1232000>;
+	regulator-allow-set-load;
 };
 
 &remoteproc_cdsp {
@@ -57,3 +129,49 @@ &sdhc_1 {
 
 	status = "okay";
 };
+
+&tlmm {
+	panel_rst_n: panel-rst-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	panel_rst_n_suspend: panel-rst-n-suspend-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel-te-pin-state {
+		pins = "gpio86";
+		function = "mdp_vsync_p";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	panel_bl_en: panel-bl-en-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	panel_bl_en_suspend: panel-bl-en-suspend-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+		output-low;
+	};
+
+	lcd_bias_en: lcd-bias-en-state {
+		pins = "gpio151";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};

-- 
2.34.1