Re: [PATCH] i2c: tiny-usb: add Zephyr Project VID/PID pair

[Fabio Baltieri]

Heya,

On Thu, Aug 20, 2026 at 11:39:46PM +0200, Benjamin Cabé wrote:
> The Zephyr Project ships an i2c-tiny-usb sample with its USB device
> stack, which turns any supported board into a USB-to-I2C bridge. The
> sample implements the same vendor request protocol as the original
> i2c-tiny-usb firmware, exposing a single vendor-specific interface
> with no endpoints, so it can be driven by this driver as-is.
> 
> Zephyr in-tree samples must use the project's own USB vendor ID
> (0x2fe3) rather than a donated or third-party one, and product ID
> 0x0013 is reserved for this sample in the project's VID/PID list.
> Without an entry here, users have to bind the device by hand through
> the driver's dynamic ID sysfs attribute.
> 
> Link: https://github.com/zephyrproject-rtos/zephyr/commit/281b5743d183
> Assisted-by: Claude:claude-opus-5
> Signed-off-by: Benjamin Cabé <kartben@xxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-tiny-usb.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
> index 73355a56aabf..113af96728dd 100644
> --- a/drivers/i2c/busses/i2c-tiny-usb.c
> +++ b/drivers/i2c/busses/i2c-tiny-usb.c
> @@ -157,11 +157,13 @@ static const struct i2c_algorithm usb_algorithm = {
>  /*
>   * Initially the usb i2c interface uses a vid/pid pair donated by
>   * Future Technology Devices International Ltd., later a pair was
> - * bought from EZPrototypes
> + * bought from EZPrototypes. The Zephyr Project reserved a pid from
> + * its own vid for the i2c-tiny-usb sample of its USB device stack.
>   */
>  static const struct usb_device_id i2c_tiny_usb_table[] = {
>  	{ USB_DEVICE(0x0403, 0xc631) },   /* FTDI */
>  	{ USB_DEVICE(0x1c40, 0x0534) },   /* EZPrototypes */
> +	{ USB_DEVICE(0x2fe3, 0x0013) },   /* Zephyr Project */
>  	{ }                               /* Terminating entry */
>  };

Thanks this makes the Zephyr side sample way easier to use.

Reviewed-by: Fabio Baltieri <fabiobaltieri@xxxxxxxxxxxx>

Cheers,
Fabio