[PATCH 08/48] clk: qcom: dispcc-sm6115: Use common probe handling for always-on clocks

[Abel Vesa]

Describe the always-on branches in a critical_cbcrs array and reference
it through qcom_cc_driver_data. Let qcom_cc_really_probe() enable these
branches instead of programming them directly in the driver's probe.

Assisted-by: LLM
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
---
 drivers/clk/qcom/dispcc-sm6115.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/dispcc-sm6115.c b/drivers/clk/qcom/dispcc-sm6115.c
index 9a7b8ad646ed..f6f5edf07f03 100644
--- a/drivers/clk/qcom/dispcc-sm6115.c
+++ b/drivers/clk/qcom/dispcc-sm6115.c
@@ -561,7 +561,17 @@ static const struct regmap_config disp_cc_sm6115_regmap_config = {
 	.fast_io = true,
 };
 
+static const u32 disp_cc_sm6115_critical_cbcrs[] = {
+	0x604c, /* DISP_CC_XO_CLK */
+};
+
+static const struct qcom_cc_driver_data disp_cc_sm6115_driver_data = {
+	.clk_cbcrs = disp_cc_sm6115_critical_cbcrs,
+	.num_clk_cbcrs = ARRAY_SIZE(disp_cc_sm6115_critical_cbcrs),
+};
+
 static const struct qcom_cc_desc disp_cc_sm6115_desc = {
+	.driver_data = &disp_cc_sm6115_driver_data,
 	.config = &disp_cc_sm6115_regmap_config,
 	.clks = disp_cc_sm6115_clocks,
 	.num_clks = ARRAY_SIZE(disp_cc_sm6115_clocks),
@@ -588,9 +598,6 @@ static int disp_cc_sm6115_probe(struct platform_device *pdev)
 
 	clk_alpha_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
 
-	/* Keep some clocks always-on */
-	qcom_branch_set_clk_en(regmap, 0x604c); /* DISP_CC_XO_CLK */
-
 	ret = qcom_cc_really_probe(&pdev->dev, &disp_cc_sm6115_desc, regmap);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to register DISP CC clocks\n");

-- 
2.54.0