[PATCH v2 08/15] arm64: dts: qcom: sm8250: Move PCIe phy and GPIOs to root port node
From: Krishna Chaitanya Chundru
Date: Thu Sep 17 2026 - 09:12:35 EST
The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys, phy-names, perst-gpios, and wake-gpios
from the controller to the existing pcieport0 and newly labeled
pcie1_port0 and pcie2_port0, allowing board-level overrides. Rename
perst-gpios to reset-gpios to match the binding used in the root
port context.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e0c357222bc7..caabd201c0d9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2207,12 +2207,6 @@ pcie0: pcie@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_phy>;
- phy-names = "pciephy";
-
- perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
-
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
dma-coherent;
@@ -2224,6 +2218,10 @@ pcieport0: pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
+ phys = <&pcie0_phy>;
+ reset-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
+
#address-cells = <3>;
#size-cells = <2>;
ranges;
@@ -2334,12 +2332,6 @@ pcie1: pcie@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_phy>;
- phy-names = "pciephy";
-
- perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
-
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
dma-coherent;
@@ -2351,6 +2343,10 @@ pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
+ phys = <&pcie1_phy>;
+ reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
+
#address-cells = <3>;
#size-cells = <2>;
ranges;
@@ -2461,12 +2457,6 @@ pcie2: pcie@1c10000 {
power-domains = <&gcc PCIE_2_GDSC>;
- phys = <&pcie2_phy>;
- phy-names = "pciephy";
-
- perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
-
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
dma-coherent;
@@ -2478,6 +2468,10 @@ pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
+ phys = <&pcie2_phy>;
+ reset-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+
#address-cells = <3>;
#size-cells = <2>;
ranges;
--
2.34.1