Re: [PATCH v2 06/15] arm64: dts: qcom: sdm845: Move PCIe phy and GPIOs to root port node

[Konrad Dybcio]

On 9/17/26 2:25 PM, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys and phy-names from the controller to
> pcie0_port0 and pcie1_port0, adding labels to these nodes to allow
> board-level overrides. Move perst-gpios/wake-gpios from the
> controller overrides to the respective port nodes in the board files,
> renaming perst-gpios to reset-gpios to match the binding used in the
> root port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad