Re: [PATCH v2 08/15] arm64: dts: qcom: sm8250: Move PCIe phy and GPIOs to root port node

[Konrad Dybcio]

On 9/17/26 2:25 PM, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys, phy-names, perst-gpios, and wake-gpios
> from the controller to the existing pcieport0 and newly labeled
> pcie1_port0 and pcie2_port0, allowing board-level overrides. Rename
> perst-gpios to reset-gpios to match the binding used in the root
> port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad