[PATCH 0/4] clk: introduce TC9564 clock and reset

From: Alex Elder

Date: Fri Sep 18 2026 - 13:00:11 EST


This series adds support for the clock and reset controller present
within the TC9564 SoC.

This SoC attaches to a host system via PCIe. It includes a PCIe
switch with three downstream ports. To one of these ports an
embedded PCIe endpoint is attached, and it implements two PCI
functions. BAR 4 for both of these PCI functions provides access
to the registers that enable or disable a number of clock signals,
and assert or deassert a set of reset lines.

The TC9564 PCI functions provide PCI endpoint buses via devicetree.
This allows a PCI function to use devicetree to define subordinate
devices accessible using one or more of the function's BARs. The
clock/reset driver binds with a device defined this way. Only one
of the two PCI functions is permitted to define the clock/reset
device node.

-Alex

Note: to work correctly, this series depends on this:
https://lore.kernel.org/lkml/20260918152659.413268-1-elder@xxxxxxxxxxxx/


Alex Elder (4):
dt-bindings: mfd: introduce the TC9564 config syscon
dt-bindings: clock: introduce toshiba,tc9564-clock.yaml
clk: toshiba: introduce a TC9564 SoC clock and reset driver
arm64: dts: qcom: qcs6490-rb3gen2: add the clock controller

.../bindings/clock/toshiba,tc9564-clock.yaml | 64 +++
.../bindings/mfd/toshiba,tc9564.yaml | 56 +++
MAINTAINERS | 9 +
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 22 +-
drivers/clk/Kconfig | 11 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-tc9564.c | 366 ++++++++++++++++++
include/dt-bindings/clock/toshiba,tc9564.h | 54 +++
8 files changed, 582 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/clock/toshiba,tc9564-clock.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/toshiba,tc9564.yaml
create mode 100644 drivers/clk/clk-tc9564.c
create mode 100644 include/dt-bindings/clock/toshiba,tc9564.h


base-commit: 79d34e34e9ab629be19e588ec2eb7e1855d6dc46
--
2.53.0