[PATCH] scsi: lasi700: put SCSI host on remove

[Guangshuo Li]

lasi700_probe() obtains a SCSI host through NCR_700_detect(). The
probe failure path drops the host reference with scsi_host_put(), but
the normal remove path does not perform the corresponding cleanup.

As a result, the SCSI host reference remains allocated after the
driver is removed.

Call scsi_host_put() after all users of the SCSI host have been torn
down to release the reference acquired during probe.

This issue was found by manual code inspection.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Guangshuo Li <lgs201920130244@xxxxxxxxx>
---
 drivers/scsi/lasi700.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 6d1fb55cc3ad..1b4982cde210 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -146,6 +146,7 @@ lasi700_driver_remove(struct parisc_device *dev)
 	free_irq(host->irq, host);
 	iounmap(hostdata->base);
 	kfree(hostdata);
+	scsi_host_put(host);
 }
 
 static struct parisc_driver lasi700_driver __refdata = {
-- 
2.43.0