[PATCH v2] powerpc/ftrace: Don't restore r13 during ftrace_regs_caller

[Shrikanth Hegde]

Michal reported a stack-protector failure and subsequent panic when
running kernel builds. This was observed with full/lazy preemption.
Initially it was suspected as KVM, but later turned out to be due
to a bcc tool running in parallel.

Issue was recreated using a bcc tool. 
For example, running below in parallel leads to crash.
./funccount sched* -d 100 and make -j 64

The same crash was observed when running kprobe for schedule() function,
while simpler function tracer for schedule() didn't cause the crash.
This helped to narrow it down to ftrace backed kprobes area.

The crash occurs as follows:

ftrace_regs_caller entry on CPU A
    |
    +-> save r13 = CPU A PACA into pt_regs
    |
    +-> call kprobe_ftrace_handler()
            |
            +-> ftrace_test_recursion_unlock()
                    |
                    +-> preempt_enable
                    +-> task can schedule and migrate to CPU B
                    +-> task resumes with live r13 = CPU B PACA
    |
    +-> REST_GPRS(2, 31)
            |
            +-> restore saved r13 = CPU A PACA
    |
    |-> The task then continues running on CPU B with r13 pointing
    |   to CPU A's PACA.

The stack-protector canary is accessed through the PACA. After the task
migrates, CPU A may run a different task and update its PACA with that
task's canary. Restoring the saved r13 then causes the migrated task's
saved stack canary to be compared against the canary in CPU A's PACA,
resulting in a stack-protector failure.

Similarly, current is resolved through the PACA. With a stale r13,
preempt_count() can access the state of the task referenced by CPU A's
PACA instead of the task running on CPU B. This results in corrupted
preempt-count warnings and scheduling-while-atomic failures.

This path for example is called when using kprobes and parallel kernel
builds can cause preemptions during ftrace_test_recursion_unlock.

Do not restore r13 from the saved register frame. If the task did not
migrate, the live r13 already has the saved value. If it migrated, the
live r13 contains the correct PACA pointer for the CPU on which the task
resumed.

On PPC32, r13 is regular register. So do this fix only for PPC64

Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") 
Reported-by: Michal Suchánek <msuchanek@xxxxxxx>
Closes: https://lore.kernel.org/all/aqKfsVArHHaIK6M9@xxxxxxxxxxxxxx/
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@xxxxxxxxxx>
Reviewed-by: Hari Bathini <hbathini@xxxxxxxxxxxxx>
Signed-off-by: Shrikanth Hegde <sshegde@xxxxxxxxxxxxx>
---
v1->v2: 
- On PPC32 r13 is regular register. So continue to restore it.
- Picked up the tags.
v1: https://lore.kernel.org/all/20260918150811.1743769-1-sshegde@xxxxxxxxxxxxx/

 arch/powerpc/kernel/trace/ftrace_entry.S | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/powerpc/kernel/trace/ftrace_entry.S b/arch/powerpc/kernel/trace/ftrace_entry.S
index 6599fe3c6234..5eb8eee32549 100644
--- a/arch/powerpc/kernel/trace/ftrace_entry.S
+++ b/arch/powerpc/kernel/trace/ftrace_entry.S
@@ -220,7 +220,13 @@
 
 	/* Restore gprs */
 	.if \allregs == 1
+#ifdef CONFIG_PPC64
+	REST_GPRS(2, 12, r1)
+	/* Do not restore a stale PACA pointer if the task migrated */
+	REST_GPRS(14, 31, r1)
+#else
 	REST_GPRS(2, 31, r1)
+#endif
 	.else
 	REST_GPRS(3, 10, r1)
 #if defined(CONFIG_LIVEPATCH_64) || defined(CONFIG_PPC_FTRACE_OUT_OF_LINE)
-- 
2.52.0