Re: [PATCH v6 04/12] leds: trigger: Add offloaded() callback and provide trigger_may_offload attribute

[Lee Jones]

On Fri, 11 Sep 2026, Rong Zhang wrote:

> Hi Lee,
> 
> Thanks for your review.
> 
> On Thu, 2026-09-10 at 16:05 +0100, Lee Jones wrote:
> > On Wed, 02 Sep 2026, Rong Zhang wrote:
> > 
> > > There are multiple triggers implementing hardware control. However, the
> > > LED trigger core doesn't really know the hardware control (offloaded)
> > > state since the coordination is done directly between the trigger and
> > > the LED driver. It can only assume private triggers as offloaded and
> > > generic ones as not offloaded.
> > > 
> > > Add an offloaded() callback so that triggers can report their offloaded
> > > states to the LED trigger core. When unimplemented, it defaults to true
> > > for private triggers and false for generic ones to keep the current
> > > behavior unchanged.
> > > 
> > > With that, provide a new attribute "trigger_may_offload", so that
> > > userspace can determine:
> > > 
> > > - if the LED device supports hardware control (supported => visible)
> > > - which trigger is the hardware control trigger selected by the LED
> > >   device
> > > - if the trigger is selected ("<foo_trigger>")
> > > - if the trigger is offloaded ("[foo_trigger]")
> > > 
> > > Note: the documentation describes the attribute as "returning a list"
> > > despite the LED core currently only supports one hardware control
> > > trigger per LED device. This is intentional to make the attribute
> > > extensible in the future without breaking userspace.
> > > 
> > > Acked-by: Ike Panhc <ikepanhc@xxxxxxxxx>
> > > Signed-off-by: Rong Zhang <i@xxxxxxxx>
> > > ---
> > > Changes in v6:
> > > - Update Date: and KernelVersion: for the document of
> > >   /sys/class/leds/<led>/trigger_may_offload
> > > 
> > > Changes in v3:
> > > - Rearrange the series so that the code using the offloaded() callback is
> > >   introduced before the driver implementation (thanks Thomas Weißschuh)
> > > - Reword documentation (ditto)
> > > - Adopt guard() and lockdep (ditto)
> > > - Adopt __led_trigger_is_hw_controlled() from newly-integrated PATCH 1
> > > ---
> > >  Documentation/ABI/testing/sysfs-class-led | 22 ++++++++++++++++++++++
> > >  Documentation/leds/leds-class.rst         | 20 ++++++++++++++++++++
> > >  drivers/leds/led-class.c                  | 22 ++++++++++++++++++++++
> > >  drivers/leds/led-triggers.c               | 30 ++++++++++++++++++++++++++++++
> > >  drivers/leds/leds.h                       |  2 ++
> > >  include/linux/leds.h                      |  1 +
> > >  6 files changed, 97 insertions(+)
> > > 
> > > diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
> > > index d4c918cc11a1..e3605fc55fa8 100644
> > > --- a/Documentation/ABI/testing/sysfs-class-led
> > > +++ b/Documentation/ABI/testing/sysfs-class-led
> > > @@ -78,6 +78,28 @@ Description:
> > >  		(which would often be configured in the device tree for the
> > >  		hardware).
> > >  
> > > +What:		/sys/class/leds/<led>/trigger_may_offload
> > 
> > *_to_hw?
> 
> ACK.
> 
> > 
> > > +Date:		September 2026
> > > +KernelVersion:	7.4
> > > +Contact:	linux-leds@xxxxxxxxxxxxxxx
> > > +Description:
> > > +		Names and states of triggers that may be offloaded to hardware.
> > > +		Such triggers are also called "hardware control trigger" in some
> > > +		context.
> > > +
> > > +		Only exists when the LED supports trigger offload.
> > > +
> > > +		Reading this file returns a list of triggers that are capable to
> > > +		be offloaded. The optional brackets around the trigger name
> > > +		indicate the state of the current trigger:
> > > +
> > > +		- `foo_trigger`: the trigger is not selected.
> > > +		- `<foo_trigger>`: the trigger is selected, but falls back to
> > > +		  software blink for some reason (e.g., incompatible trigger
> > > +		  parameters)
> > > +		- `[foo_trigger]`: the trigger is selected and offloaded to
> > > +		  hardware.
> > > +
> > >  What:		/sys/class/leds/<led>/inverted
> > >  Date:		January 2011
> > >  KernelVersion:	2.6.38
> > > diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst
> > > index 3913966cfdac..2d41a6db602c 100644
> > > --- a/Documentation/leds/leds-class.rst
> > > +++ b/Documentation/leds/leds-class.rst
> > > @@ -242,6 +242,9 @@ ops and needs to declare specific support for the supported triggers.
> > >  
> > >  With hw control we refer to the LED driven by hardware.
> > >  
> > > +A sysfs attribute `trigger_may_offload` is provided for userspace to
> > > +query supported triggers and their states.
> > > +
> > >  LED driver must define the following value to support hw control:
> > >  
> > >      - hw_control_trigger:
> > > @@ -298,6 +301,15 @@ LED driver must implement the following API to support hw control:
> > >                  Returns a pointer to a struct device or NULL if nothing
> > >                  is currently attached.
> > >  
> > > +LED trigger should implement the following API to indicate hw control:
> > > +    - offloaded:
> > 
> > hw_offloaded?
> 
> ACK.
> 
> > 
> > > +                return a boolean indicating if the trigger is currently
> > > +                offloaded to hardware.
> > > +
> > > +                If a trigger doesn't implement this callback, the default
> > > +                value will be true for private triggers and false for generic
> > > +                ones.
> > > +
> > >  LED driver can activate additional modes by default to workaround the
> > >  impossibility of supporting each different mode on the supported trigger.
> > >  Examples are hardcoding the blink speed to a set interval, enable special
> > > @@ -311,6 +323,14 @@ the end use hw_control_set to activate hw control.
> > >  A trigger can use hw_control_get to check if a LED is already in hw control
> > >  and init their flags.
> > >  
> > > +Alternatively, a private trigger can be implemented along with the LED driver if
> > > +the LED's hardware control doesn't fit any generic trigger. To associate the
> > > +private trigger with the LED classdev, their `trigger_type` must be the same. To
> > > +declare that the private trigger provides hardware control for the associated
> > > +LED classdev, set the `hw_control_trigger` string to the trigger's name. Since
> > > +both the LED classdev and the private trigger are in the same LED driver, it's
> > > +not necessary for them to coordinate via `hw_control_*` callbacks.
> > > +
> > >  When the LED is in hw control, no software blink is possible and doing so
> > >  will effectively disable hw control.
> > >  
> > > diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
> > > index 39cc2f3ea63f..7e571bd1de5b 100644
> > > --- a/drivers/leds/led-class.c
> > > +++ b/drivers/leds/led-class.c
> > > @@ -96,8 +96,30 @@ static const struct bin_attribute *const led_trigger_bin_attrs[] = {
> > >  	&bin_attr_trigger,
> > >  	NULL,
> > >  };
> > > +
> > > +static DEVICE_ATTR_RO(trigger_may_offload);
> > > +static struct attribute *led_trigger_attrs[] = {
> > > +	&dev_attr_trigger_may_offload.attr,
> > > +	NULL
> > > +};
> > > +
> > > +static umode_t led_trigger_is_visible(struct kobject *kobj,
> > 
> > Why doesn't all of this live in the triggers file as well?
> 
> The current revision only exports trigger_may_offload() to coordinate the
> two files (led-class.c and led-trigger.c).
> 
> If we had to move led_trigger_is_visible() into led-triggers.c, the
> trigger_may_offload and led_trigger_attrs must be moved as well. Due to
> the movement, we would have to export led_trigger_attrs and
> led_trigger_is_visible() to fill led_trigger_group.
> 
> in short, moving led_trigger_is_visible() requires exporting more
> symbols.
> 
> To make things tidier, how about moving led_trigger_group and
> led_trigger_bin_attrs into led-triggers.c as well? In this manner we only
> need to export led_trigger_group, and the #ifdef block here is
> eliminated. What do you think?

Sounds sensible.

> > 
> > > +				      struct attribute *attr,
> > > +				      int idx)
> > > +{
> > > +	struct device *dev = kobj_to_dev(kobj);
> > > +	struct led_classdev *led_cdev = dev_get_drvdata(dev);
> > > +
> > > +	if (attr == &dev_attr_trigger_may_offload.attr)
> > > +		return led_cdev->hw_control_trigger ? attr->mode : 0;
> > > +
> > > +	return attr->mode;
> > > +}
> > > +
> > >  static const struct attribute_group led_trigger_group = {
> > >  	.bin_attrs = led_trigger_bin_attrs,
> > > +	.attrs = led_trigger_attrs,
> > > +	.is_visible = led_trigger_is_visible,
> > >  };
> > >  #endif
> > >  
> > > diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
> > > index 804a04b326c4..de17a8bbb4d4 100644
> > > --- a/drivers/leds/led-triggers.c
> > > +++ b/drivers/leds/led-triggers.c
> > > @@ -42,6 +42,10 @@ static bool __led_trigger_is_hw_controlled(struct led_classdev *led_cdev)
> > >  	if (!led_cdev->trigger)
> > >  		return false;
> > >  
> > > +	if (led_cdev->trigger->offloaded)
> > > +		return led_cdev->trigger->offloaded(led_cdev);
> > > +
> > > +	/* Otherwise assume private triggers as always offloaded. */
> > 
> > s/as/are/
> 
> ACK.
> 
> > 
> > >  	return led_cdev->trigger->trigger_type;
> > >  }
> > >  
> > > @@ -341,6 +345,32 @@ void led_trigger_set_default(struct led_classdev *led_cdev)
> > >  }
> > >  EXPORT_SYMBOL_GPL(led_trigger_set_default);
> > >  
> > > +ssize_t trigger_may_offload_show(struct device *dev,
> > > +				 struct device_attribute *attr, char *buf)
> > > +{
> > > +	struct led_classdev *led_cdev = dev_get_drvdata(dev);
> > > +	struct led_trigger *trig;
> > > +	bool hit, offloaded;
> > > +	int len;
> > > +
> > > +	guard(mutex)(&led_cdev->led_access);
> > > +	guard(rwsem_read)(&led_cdev->trigger_lock);
> > > +
> > > +	trig = led_cdev->trigger;
> > > +
> > > +	offloaded = __led_trigger_is_hw_controlled(led_cdev);
> > > +	hit = offloaded || (trig && !strcmp(led_cdev->hw_control_trigger, trig->name));
> > > +
> > > +	/* [offloaded] <active_but_not_offloaded> inactive */
> > 
> > Why do they have to live in different 'containers'?
> 
> The comment might be somewhat misleading...
> 
> An LED device can never have an offloaded trigger and an active-but-not-
> offloaded trigger at the same time. The comment just demonstrates how the
> output might look like.
> 
> The output is multiplexed to help userspace determine two things in one
> read:
> 
> - The name of the LED device's hardware control trigger
> - The state of the said trigger
> 
> That being said, if the complexity is undesired, it's OK to convert the
> attribute into a dumb one that only returns the plain name of the
> hardware control trigger. In this manner we will need to provide an
> additional attribute to expose the offloaded state. This can be achieved
> by adopting the attribute "offloaded" from netdev into led-triggers.c.
> What do you think?

My job is just to make you think about the problem.  I have no strong
opinion one way or the other.  You are currently the expert of the code
you are engineering.  What do YOU think?

-- 
Lee Jones