[PATCH] net: phy: aquantia: AQR113c fix up PMA capabilities

[Hongmei Xu]

AQR113c does not report few of the supported PMA
capabilities which includes speeds like 10G/5G/2.5G,
add get features support within aquantia driver to fix
the same.

Signed-off-by: Hongmei Xu <hongmei.xu@xxxxxxxxxxxxxxxx>
---
 drivers/net/phy/aquantia/aquantia_main.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index e95d391a6dc2..604f5492515d 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -1094,6 +1094,18 @@ static int aqr111_get_features(struct phy_device *phydev)
 	return 0;
 }
 
+static int aqr113c_get_features(struct phy_device *phydev)
+{
+	/* Generic C45 PMA abilities do not fully describe the PHY's copper
+	 * autonegotiation modes, so add the 10G mode explicitly.
+	 */
+	aqr111_get_features(phydev);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			 phydev->supported);
+
+	return 0;
+}
+
 static int aqr_gen4_config_init(struct phy_device *phydev)
 {
 	struct aqr107_priv *priv = phydev->priv;
@@ -1444,6 +1456,7 @@ static struct phy_driver aqr_driver[] = {
 	.get_sset_count = aqr107_get_sset_count,
 	.get_strings    = aqr107_get_strings,
 	.get_stats      = aqr107_get_stats,
+	.get_features   = aqr113c_get_features,
 	.link_change_notify = aqr107_link_change_notify,
 	.led_brightness_set = aqr_phy_led_brightness_set,
 	.led_hw_is_supported = aqr_phy_led_hw_is_supported,

---
base-commit: 063510768490d85454a99b27be303aad5efdf624
change-id: 20260917-net-phy-aqr113c-fix-pma-capability-d7d08cbc9879

Best regards,
--  
Hongmei Xu <hongmei.xu@xxxxxxxxxxxxxxxx>