Re: [PATCH 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support

[Troy Mitchell]

On Tue, Sep 22, 2026 at 07:04:50PM +0800, Sandie Cao wrote:
> @@ -184,6 +185,24 @@ &combophy {
> [...]
> +&sdhci0 {
> +	pinctrl-names = "default","uhs";
> +	pinctrl-0 = <&mmc1_cfg>;
> +	pinctrl-1 = <&mmc1_uhs_cfg>;
> +	bus-width = <4>;
> +	cd-gpios = <&gpio K3_GPIO(88) GPIO_ACTIVE_LOW>;

Does GPIO88 have an external pull-up? The SDK DTS [1] also includes
mmc1_cd_cfg in both pinctrl states, with a pull-up and 3.3 V configuration.
Neither mmc1_cfg nor mmc1_uhs_cfg covers this pin. Is that configuration
unnecessary on this board?

> +	no-mmc;
> +	no-sdio;
> +	disable-wp;
> +	cap-sd-highspeed;
> +	vmmc-supply = <&aldo4>;
> +	vqmmc-supply = <&aldo1>;

Could you confirm which rail supplies the card's VDD? The SDK DTS [1]
uses p3v3 for vmmc rather than aldo4. Does that RPMI regulator map to
ALDO4, or is the card powered by a different rail?

Link: https://github.com/spacemit-com/linux-6.18/blob/k3-br-v1.0.y/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts [1]

-- 
Troy Mitchell

Attachment: signature.asc
Description: PGP signature