Re: [PATCH 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support
From: Troy Mitchell
Date: Wed Sep 23 2026 - 05:21:06 EST
On Wed Sep 23, 2026 at 4:01 PM +08, Sandie Cao wrote:
> Hi, Troy:
>
>> From: "Troy Mitchell"<troy.mitchell@xxxxxxxxxxxxxxxxxx>
>> Date: Wed, Sep 23, 2026, 15:02
>> On Wed, Sep 23, 2026 at 02:35:20PM +0800, Sandie Cao wrote:
>> > FML13V05 SD card slot is inside the board, it doesn't need cd-gpio,
>> > FML13V05 Keeps GPIO88 to low, Then SD card is always on for SD Card
>> > driver.
>>
>> An internal slot does not necessarily mean the card is non-removable.
>> I don't think its location alone justifies keeping card detect asserted:
>> GPIO88 would report a card present even when the slot is empty.
>
> Yes. The FML13V05 hardware is designed for this. We can't change it.
I may not have been clear: an internal card slot does not necessarily
mean the card is non-removable. If GPIO88 is connected to the
card-detect switch, it still needs a pull-up. Is GPIO88 tied low on
the board, or does it reflect the state of that switch?
>
>>
>> > We check the vmmc-supply is p3v3. We have the same SDK DTS config with
>> > k3_com260[1] , so, this patch follows the SD card patch of k3_com260
>> > dts[2].
>> >
>> > If this is not correct, we will change it.
>>
>> Could you confirm from the schematics that the SD power wiring matches
>> CoM260 and that the card's VDD is actually connected to ALDO4? If so,
>> this supply reference is fine. The same SDK configuration alone does
>> not establish the wiring.
>>
>> If the card instead uses a fixed, always-on supply with no software power
>> control, vmmc-supply is optional for the MMC core; it should not point to
>> an unrelated ALDO4 rail.
>
> We check the schematics both of COM260 and FML13V05, both use p3v3 (a fixed, always-on supply with no software power control), not ALDO4. ALD04 is only for USB.
> We will correct it in next patch.
I'll send a separate patch to fix the CoM260 vmmc-supply reference.
You can focus on FML13V05 in this series.
>
> Best regards
> Sandie
>
>>
>> --
>> Troy Mitchell
>>
--
Troy Mitchell
Attachment:
signature.asc
Description: PGP signature