[PATCH RFC 11/15] arm64: dts: qcom: maili: Add support for cambistmclkcc and camcc

[Nihal Kumar Gupta]

From: Taniya Das <taniya.das@xxxxxxxxxxxxxxxx>

Add the device nodes for the cambistmclkcc and camcc on Qualcomm
Maili SoC.

Signed-off-by: Taniya Das <taniya.das@xxxxxxxxxxxxxxxx>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/maili.dtsi | 43 +++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/maili.dtsi b/arch/arm64/boot/dts/qcom/maili.dtsi
index 886d307e536be6152906e344289d5b3fb290f0a4..fb404d6c3e92ed95ecd01782c389096fae402701 100644
--- a/arch/arm64/boot/dts/qcom/maili.dtsi
+++ b/arch/arm64/boot/dts/qcom/maili.dtsi
@@ -3,9 +3,11 @@
  * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
  */
 
+#include <dt-bindings/clock/qcom,hawi-camcc.h>
 #include <dt-bindings/clock/qcom,hawi-gcc.h>
 #include <dt-bindings/clock/qcom,hawi-gpucc.h>
 #include <dt-bindings/clock/qcom,hawi-tcsrcc.h>
+#include <dt-bindings/clock/qcom,kaanapali-cambistmclkcc.h>
 #include <dt-bindings/clock/qcom,kaanapali-gxclkctl.h>
 #include <dt-bindings/clock/qcom,maili-videocc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -2038,6 +2040,25 @@ pcie_anoc: interconnect@16c0000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		cambistmclkcc: clock-controller@1760000 {
+			compatible = "qcom,maili-cambistmclkcc",
+				     "qcom,kaanapali-cambistmclkcc";
+			reg = <0x0 0x01760000 0x0 0x6000>;
+
+			clocks = <&gcc GCC_CAM_BIST_MCLK_AHB_CLK>,
+				 <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MX>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		mmss_noc: interconnect@1780000 {
 			compatible = "qcom,maili-mmss-noc";
 			reg = <0x0 0x01780000 0x0 0x5f800>;
@@ -4037,6 +4058,28 @@ lpass_ag_noc: interconnect@8f40000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		camcc: clock-controller@956d000 {
+			compatible = "qcom,maili-camcc";
+			reg = <0x0 0x0956d000 0x0 0x80000>;
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+
+			interconnects = <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ALWAYS>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		usb: usb@a600000 {
 			compatible = "qcom,maili-dwc3", "qcom,snps-dwc3";
 			reg = <0x0 0x0a600000 0x0 0xfc100>;

-- 
2.34.1