Re: [PATCH PRELIMINARY 5/5] arm64: dts: qcom: shikra-iqs-evk: enable both Ethernet ports

[Konrad Dybcio]

On 9/8/26 8:23 AM, Mohd Ayaan Anwar wrote:
> Enable ethernet0 and ethernet1 on the IQS EVK with their respective
> TI DP83867 RGMII PHYs. Both PHYs are powered by GPIO-controlled 2.5V
> regulators.
> 
> Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@xxxxxxxxxxxxxxxx>
> ---

[...]

> +&tlmm {
> +	rgmii_phy0_pwr_default: rgmii-phy0-pwr-default-state {
> +		pins = "gpio66";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +		output-low;
> +	};
> +
> +	rgmii_phy1_pwr_default: rgmii-phy1-pwr-default-state {
> +		pins = "gpio53";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +		output-low;
> +	};

and in both places here

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad