[PATCH 0/3] Add Renesas RZ/N1x EDAC driver

[Paul Louvel]

The Cadence memory controller found on Renesas RZ/N1x SoCs supports ECC
with SECDED.

The memory controller found on the r9a06g032 supports at most a single
DIMM of DDR2/3, up to 2GB.

Add the EDAC driver for this memory controller, and the relevant
device-tree binding. Also add the EDAC node to the existing r9a06g032
SoC base device-tree.

Signed-off-by: Paul Louvel (Schneider Electric) <paul.louvel@xxxxxxxxxxx>
---
Paul Louvel (3):
      dt-bindings: edac: cdns,ddr-edac: add Cadence DDR EDAC binding
      EDAC/cadence: Add Cadence DDR EDAC driver
      ARM: dts: renesas: r9a06g032: add EDAC node

 .../devicetree/bindings/edac/cdns,ddr-edac.yaml    |  62 ++++
 MAINTAINERS                                        |   7 +
 arch/arm/boot/dts/renesas/r9a06g032.dtsi           |  10 +
 drivers/edac/Kconfig                               |  10 +
 drivers/edac/Makefile                              |   1 +
 drivers/edac/cadence_edac.c                        | 333 +++++++++++++++++++++
 6 files changed, 423 insertions(+)
---
base-commit: d9f39b2c0579f313d14954a9ec584511c543aab5
change-id: 20260916-paul-v7-3-rc1-edac-1f479f96fc57

Best regards,
--  
Paul Louvel, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com