Re: [PATCH v4 1/6] dt-bindings: phy: qcom: add Nord QMP PCIe PHY binding

[Krzysztof Kozlowski]

On Mon, Sep 21, 2026 at 11:07:09AM +0530, Krishna Chaitanya Chundru wrote:
> +
> +  vdda-pll-d-supply: true
> +
> +  qcom,link-mode:
> +    description:
> +      Reference to the TCSR syscon register containing the PCIe link mode
> +      selected by firmware. The property consists of the TCSR syscon
> +      phandle followed by the offset of the TCSR_PCIE_LINK_CONFIG_MODE
> +      register.
> +      The register value selects one of these topologies.
> +        0 (QMP_PCIE_NORD_MODE_X16)         — all ports combined as one x16 PHY
> +        1 (QMP_PCIE_NORD_MODE_X8_X8)       — port A as x8 and ports B+C+D as x8
> +        2 (QMP_PCIE_NORD_MODE_X8_X4_X4)    — port A as x8, port B as x4, and ports C+D as x4
> +        3 (QMP_PCIE_NORD_MODE_X8_X4_X2_X2) — port A as x8, port B as x4, and ports C and D as x2

Same question as last time. phy-cells tells which mode you are here.
This is duplicating it and the register value CANNOT choose the
topology. If it does, then phy-cells should be 0 as topology is defined
by hardware already, no?

> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: Phandle of the TCSR syscon
> +          - description: Offset of TCSR_PCIE_LINK_CONFIG_MODE register

Best regards,
Krzysztof