Re: [net-next,PATCH v1] enetc: Increase eMDIO MDC rate to 1.2 MHz
From: Marek Vasut
Date: Thu Sep 24 2026 - 14:17:24 EST
On 9/24/26 4:21 AM, Andrew Lunn wrote:
Done in V2, thank you !If the property is absent, you should configure the standard 2.5MHz rate by
default, instead of 1.2MHz.
Agreed. 802.3 says all devices on the bus should support 2.5Mhz. So i
see no real risk increasing it to whatever the hardware can do close,
but less than that.