[PATCH v2 8/8] arm64: dts: qcom: sm6350-lena: Enable PMK8350

[erebion]

Configure and enable nodes for PMK8350 on the Xperia 10 III.

Signed-off-by: erebion <erebion@xxxxxxxxxx>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 08ad5613cb6de..0f0e81683f2e5 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -8,7 +8,11 @@
 #define PM7250B_SID 2
 #define PM7250B_SID1 3
 
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
 #include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -16,6 +20,7 @@
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
 #include "pm7250b.dtsi"
+#include "pmk8350.dtsi"
 
 / {
 	model = "Sony Xperia 10 III";
@@ -425,6 +430,31 @@ &pm7250b_vbus {
 	status = "okay";
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	channel@644 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "xo_therm";
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };

-- 
2.53.0