[PATCH] arm64: dts: qcom: ipq5018: add label to PCIe1 port node

[George Moussalem via B4 Relay]

From: George Moussalem <george.moussalem@xxxxxxxxxxx>

Commit a95758e9718a ("arm64: dts: qcom: ipq5018: move PCIe phys and
PERST# to port node") added a label to the PCIe0 port node but not to
that of PCIe1. Boards that have a device connected over PCIe1 need to
reference the port node in the board dts files, so add a label for it.

Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index fe1ed240de59..2f3bcfa888a9 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -838,7 +838,7 @@ pcie1: pcie@80000000 {
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;

---
base-commit: f5f84daefcd92d7a630066635ecea1433ed5eac7
change-id: 20260927-ipq5018-pcie1-label-d7d405caf28f

Best regards,
-- 
George Moussalem <george.moussalem@xxxxxxxxxxx>