Re: [PATCH 08/10] arm64: dts: st: Add pinmux nodes for DH electronics STM32MP23xx/STM32MP25xx DHCOS SoM and Breakout Board

[Marek Vasut]

On 9/28/26 11:02 AM, Alexandre TORGUE wrote:

Hello Alexandre,

> > diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/ 
> > arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
> > index 456ece7f8ebc3..1aadbc6b47da9 100644
> > --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
> > +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
> > @@ -182,6 +182,30 @@ pins5 {
> >           };
> >       };
> > +    /omit-if-no-ref/
> > +    eth2_mdio_pins_a: eth2-mdio-0 {
> > +        pins1 {
> > +            pinmux = <STM32_PINMUX('G', 4, AF11)>; /* ETH_MDC */
> > +            bias-disable;
> > +            drive-push-pull;
> > +            slew-rate = <3>;
> > +        };
> > +        pins2 {
> > +            pinmux = <STM32_PINMUX('C', 5, AF10)>; /* ETH_MDIO */
> > +            bias-disable;
> > +            drive-push-pull;
> > +            slew-rate = <0>;
> > +        };
> > +    };
> > +
> > +    /omit-if-no-ref/
> > +    eth2_mdio_sleep_pins_a: eth2-mdio-sleep-0 {
> > +        pins {
> > +            pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* ETH_MDC */
>
> I assume it is G4 for MDC ? If yes I fix it when I apply.
It is PG4 , thank you.