Re: [PATCH v4 1/3] dt-bindings: media: i2c: Add OmniVision OV32C4

[Sakari Ailus]

Hi Robert,

On Mon, Oct 05, 2026 at 09:10:08AM +0200, Robert Bozik wrote:
> Add a binding for the OmniVision OV32C4, a 32 megapixel RGBC CMOS image
> sensor with on-chip 4-cell fusion, a 4-lane MIPI CSI-2 D-PHY transmitter
> and the standard SCCB command interface.
> 
> The sensor ships in laptops as an under-display camera, where it is
> described by ACPI; the binding follows ovti,ov08x40.yaml, which covers
> the closest relative already in tree.
> 
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> Signed-off-by: Robert Bozik <robertbozik@xxxxxxxxx>
> ---
> Changes in v4:
> - No changes to the binding.
> 
>  .../bindings/media/i2c/ovti,ov32c4.yaml       | 105 ++++++++++++++++++
>  1 file changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml
> new file mode 100644
> index 000000000..804307cd0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov32c4.yaml
> @@ -0,0 +1,105 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov32c4.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV32C4 Image Sensor
> +
> +maintainers:
> +  - Robert Bozik <robertbozik@xxxxxxxxx>
> +
> +description:
> +  The OmniVision OV32C4 is a 32 megapixel RGBC (red, green, blue and clear)
> +  CMOS image sensor in a 4-cell arrangement, with on-chip 4-cell fusion and
> +  binning. It has a 6528x4896 active pixel array, a 4-lane MIPI CSI-2 D-PHY
> +  transmitter and the standard SCCB command interface.
> +
> +allOf:
> +  - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> +  compatible:
> +    const: ovti,ov32c4
> +
> +  reg:
> +    maxItems: 1

minItems should be 2 here, for the always-on client.

> +
> +  clocks:
> +    maxItems: 1
> +    description: Input clock (XVCLK).
> +
> +  avdd-supply: true
> +
> +  dovdd-supply: true
> +
> +  dvdd-supply: true
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Active low GPIO connected to the XSHUTDOWN pad of the sensor.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        additionalProperties: false
> +
> +        properties:
> +          data-lanes:
> +            items:
> +              - const: 1
> +              - const: 2
> +              - const: 3
> +              - const: 4
> +          link-frequencies: true
> +          remote-endpoint: true
> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +          - remote-endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        camera@36 {
> +            compatible = "ovti,ov32c4";
> +            reg = <0x36>;
> +
> +            clocks = <&ov32c4_clk>;
> +            assigned-clocks = <&ov32c4_clk>;
> +            assigned-clock-rates = <19200000>;
> +
> +            avdd-supply = <&vreg_2p8>;
> +            dovdd-supply = <&vreg_1p8>;
> +            dvdd-supply = <&vreg_1p1>;
> +
> +            reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                ov32c4_ep: endpoint {
> +                    remote-endpoint = <&csiphy0_ep>;
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <400000000>;
> +                };
> +            };
> +        };
> +    };
> +...

-- 
Regards,

Sakari Ailus