Re: [PATCH v8 2/2] clk: Add gpio-locked clock driver

[Jerome Brunet]

On Sun 27 Sep 2026 at 14:59, Vyacheslav Yurkov via B4 Relay <devnull+V.Yurkov.EXT.bruker.com@xxxxxxxxxx> wrote:

> From: Vyacheslav Yurkov <V.Yurkov.EXT@xxxxxxxxxx>
>
> A gpio-locked clock exposes a clock, which status is determined by a
> GPIO signal. The common use-case is a FPGA-assisted clocking design
> where peripheral clocks are generated by FPGA PLLs that are outside
> CPU control, with clock-valid/PLL-lock status exposed through GPIO signals.
> Consumers can use the output clock to wait until the input clock is locked
> and only then initialize dependent peripherals.
>
> Signed-off-by: Vyacheslav Yurkov <V.Yurkov.EXT@xxxxxxxxxx>
> ---
>  drivers/clk/clk-gpio.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 47 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c
> index 9099c57e2715..db68b8bc44c5 100644
> --- a/drivers/clk/clk-gpio.c
> +++ b/drivers/clk/clk-gpio.c
> @@ -138,6 +138,25 @@ static const struct clk_ops clk_gpio_mux_ops = {
>  	.determine_rate = __clk_mux_determine_rate,
>  };
>  
> +/* We can't prepare the clock, but the Common Clock Framework calls only
> + * prepare() not is_prepared(), therefore we fallback on the actuall GPIO value.
> + * The function clk_sleeping_gpio_gate_is_prepared() returns the raw boolean
> + * GPIO status (1 if locked, 0 if unlocked), but the prepare callback
> + * clk_core_prepare() expects 0 for success and non-zero integer for failure.
> + */
> +static int clk_gpio_locked_prepare(struct clk_hw *hw)
> +{
> +	if (clk_sleeping_gpio_gate_is_prepared(hw))
> +		return 0;
> +
> +	return -EBUSY;
> +}

I was apparently not clear - probably my fault since I was initially
confused with what the driver was supposed to do.

Please do not modify the gate driver. Just provide gpio-enabled-clock
clock driver along the gate and mux in there.

> +
> +static const struct clk_ops clk_gpio_locked_ops = {
> +	.prepare =	clk_gpio_locked_prepare,
> +	.is_prepared =	clk_sleeping_gpio_gate_is_prepared,
> +};

Please implement the ops you've be testing, fast or slow (or both :D if
you can test both) 

> +
>  static struct clk_hw *clk_register_gpio(struct device *dev, u8 num_parents,
>  					struct gpio_desc *gpiod,
>  					const struct clk_ops *clk_gpio_ops)
> @@ -146,6 +165,7 @@ static struct clk_hw *clk_register_gpio(struct device *dev, u8 num_parents,
>  	struct clk_hw *hw;
>  	struct clk_init_data init = {};
>  	int err;
> +	const char *clk_name;
>  	const struct clk_parent_data gpio_parent_data[] = {
>  		{ .index = 0 },
>  		{ .index = 1 },
> @@ -155,7 +175,11 @@ static struct clk_hw *clk_register_gpio(struct device *dev, u8 num_parents,
>  	if (!clk_gpio)
>  		return ERR_PTR(-ENOMEM);
>  
> -	init.name = dev->of_node->name;
> +	err = device_property_read_string(dev, "clock-output-names", &clk_name);
> +	if (err)
> +		clk_name = fwnode_get_name(dev->fwnode);
> +
> +	init.name = clk_name;
>  	init.ops = clk_gpio_ops;
>  	init.parent_data = gpio_parent_data;
>  	init.num_parents = num_parents;
> @@ -192,6 +216,12 @@ static struct clk_hw *clk_hw_register_gpio_mux(struct device *dev,
>  	return clk_register_gpio(dev, 2, gpiod, &clk_gpio_mux_ops);
>  }
>  
> +static struct clk_hw *clk_hw_register_gpio_locked(struct device *dev,
> +						  struct gpio_desc *gpiod)
> +{
> +	return clk_register_gpio(dev, 1, gpiod, &clk_gpio_locked_ops);
> +}
> +
>  static int gpio_clk_driver_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -201,8 +231,11 @@ static int gpio_clk_driver_probe(struct platform_device *pdev)
>  	struct gpio_desc *gpiod;
>  	struct clk_hw *hw;
>  	bool is_mux;
> +	bool is_gpio_locked;
> +	enum gpiod_flags gpio_flags;
>  
>  	is_mux = of_device_is_compatible(node, "gpio-mux-clock");
> +	is_gpio_locked = of_device_is_compatible(node, "gpio-locked-clock");
>  
>  	num_parents = of_clk_get_parent_count(node);
>  	if (is_mux && num_parents != 2) {
> @@ -210,14 +243,24 @@ static int gpio_clk_driver_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> -	gpio_name = is_mux ? "select" : "enable";
> -	gpiod = devm_gpiod_get(dev, gpio_name, GPIOD_OUT_LOW);
> +	if (is_mux)
> +		gpio_name = "select";
> +	else if (is_gpio_locked)
> +		gpio_name = "enabled";
> +	else
> +		gpio_name = "enable";
> +
> +	gpio_flags = is_gpio_locked ? GPIOD_IN : GPIOD_OUT_LOW;
> +
> +	gpiod = devm_gpiod_get(dev, gpio_name, gpio_flags);
>  	if (IS_ERR(gpiod))
>  		return dev_err_probe(dev, PTR_ERR(gpiod),
>  				     "Can't get '%s' named GPIO property\n", gpio_name);
>  
>  	if (is_mux)
>  		hw = clk_hw_register_gpio_mux(dev, gpiod);
> +	else if (is_gpio_locked)
> +		hw = clk_hw_register_gpio_locked(dev, gpiod);
>  	else
>  		hw = clk_hw_register_gpio_gate(dev, num_parents, gpiod);
>  	if (IS_ERR(hw))
> @@ -229,6 +272,7 @@ static int gpio_clk_driver_probe(struct platform_device *pdev)
>  static const struct of_device_id gpio_clk_match_table[] = {
>  	{ .compatible = "gpio-mux-clock" },
>  	{ .compatible = "gpio-gate-clock" },
> +	{ .compatible = "gpio-locked-clock" },
>  	{ }
>  };
>  
>
> -- 
> 2.34.1
>
>

-- 
Jerome