Re: [PATCH v8 01/10] ASoC: dt-bindings: qcom,shikra-qaif-cpu: Add binding

[Rob Herring]

On Mon, Sep 28, 2026 at 06:22:51PM +0530, Harendra Gautam wrote:
> Add the Devicetree binding for the Qualcomm Audio Interface (QAIF) CPU DAI
> controller used on the Shikra audio platform.
> 
> QAIF routes audio between system memory, external PCM/TDM/MI2S serial
> interfaces and the internal Bolero/WCD codec. Platform Devicetree files
> need a binding to describe the controller resources, DAI cells and per-
> interface AIF configuration, and named constants to avoid raw numeric IDs
> in sound-dai references and child-node reg values.
> 
> Describe the MMIO region, interrupt, clocks, DMA IOMMU mapping and
> aif-interface child nodes required by the controller.
> 
> Signed-off-by: Harendra Gautam <harendra.gautam@xxxxxxxxxxxxxxxx>
> ---
>  .../bindings/sound/qcom,shikra-qaif-cpu.yaml       | 305 +++++++++++++++++++++
>  1 file changed, 305 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,shikra-qaif-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,shikra-qaif-cpu.yaml
> new file mode 100644
> index 000000000000..5cabbe54d6fd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,shikra-qaif-cpu.yaml

> +
> +  reg:
> +    maxItems: 1
> +    description: QAIF core registers

Drop the description.

> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      QAIF summary interrupt for this Execution Engine. Signals DMA period
> +      completion, buffer underflow/overflow, error response, audio interface
> +      underflow/overflow, interface-group done, rate detector and VFR events.
> +
> +  iommus:
> +    maxItems: 1
> +    description: Phandle to apps_smmu node with sid mask

Drop. The exact provider is outside the scope of this binding.

[...]

> +patternProperties:
> +  '^aif@[0-9a-f]+$':
> +    type: object
> +    description:
> +      QAIF AIF interface child node for PCM, TDM or MI2S configuration.
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +        description:
> +          DAI ID of the AIF interface (QAIF_MI2S_AIF* or QAIF_TDM_AIF*).
> +
> +      dai-format:
> +        description: Serial audio interface format (MI2S, TDM or PCM).
> +        enum: [i2s, dsp_a, dsp_b]
> +
> +      dai-tdm-slot-width:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        enum: [8, 16, 24, 32]
> +        description:
> +          Slot width in bits.
> +
> +      dai-tdm-slot-num:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          Number of slots per lane.
> +        minimum: 1
> +        maximum: 32
> +
> +      dai-tdm-slot-rx-mask:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array
> +        description:
> +          Active RX slots, one entry per slot. A nonzero value marks the
> +          slot as active.
> +        minItems: 1
> +        maxItems: 32
> +
> +      dai-tdm-slot-tx-mask:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array

These are all common properties. Don't redefine the type. You need to 
reference the common schema (at the object/node level, not per 
property).

> +        description:
> +          Active TX slots, one entry per slot. A nonzero value marks the
> +          slot as active.
> +        minItems: 1
> +        maxItems: 32
> +
> +      qcom,qaif-aif-lane-map:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array
> +        description:
> +          Per-lane direction map, one entry per lane starting from lane 0.
> +          Use 0 for TX (output/speaker) and 1 for RX (input/mic).
> +        minItems: 1
> +        maxItems: 8
> +        items:
> +          enum: [0, 1]

Can't you use a single uint32 bit mask for this?

Rob