Re: [PATCH] pinctrl: qcom: kaanapali: add the I2C strong pull-up bit

[Bartosz Golaszewski]

On Wed, 07 Oct 2026 21:40:01 +0900, Joonhoe Kim wrote:
> The Kaanapali TLMM has the I2C pull-up control in bit 13 of the pin
> config register, like SM8550, SM8650 and X1E80100, but the driver does
> not describe it, so "bias-pull-up = <2200>" cannot select the strong
> pull-up.
> 
> The downstream kernel sets it on the camera CCI pins (config 0x2007).
> On a Lenovo TB323FU tablet, with only the weak pull-up every CCI
> transfer on the two sensor buses times out; with bit 13 set the sensors
> answer and their chip IDs read correctly.
> 
> [...]

Applied, thanks!

[1/1] pinctrl: qcom: kaanapali: add the I2C strong pull-up bit
      https://git.kernel.org/brgl/c/1df7f369075d7e8f7794981995a5103f1963bab7

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>