[PATCH v20 13/13] arm64: dts: qcom: kaanapali-mtp-camera-s5kjn5: Add DT overlay

[Hangxiang Ma]

Enable the S5KJN5 image sensor via CCI on Kaanapali MTP board.

The Kaanapali MTP board connect S5KJN5 with QUP I2C bus by default. This
DTBO enables S5KJN5 on CCI-0 interface connected to the CSIPHY2 in four
lane mode on a rework camera module.

Signed-off-by: Hangxiang Ma <hangxiang.ma@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  5 ++
 .../boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso | 78 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts         |  7 ++
 3 files changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 88230c4e00ea..84b244d43e9e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -48,6 +48,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9650-rdp488.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-mtp-camera-s5kjn5.dtbo
+
+kaanapali-mtp-camera-s5kjn5-dtbs	:= kaanapali-mtp.dtb kaanapali-mtp-camera-s5kjn5.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-mtp-camera-s5kjn5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk.dtb
diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso b/arch/arm64/boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso
new file mode 100644
index 000000000000..7b574e2ed373
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp-camera-s5kjn5.dtso
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,kaanapali-cambistmclkcc.h>
+#include <dt-bindings/clock/qcom,kaanapali-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&camss {
+	status = "okay";
+};
+
+&camss_csiphy2_in_port {
+	camss_csiphy2_inep: endpoint {
+		data-lanes = <1 2 3 4>;
+		remote-endpoint = <&csiphy2_out_ep>;
+	};
+};
+
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c1 {
+	camera@10 {
+		compatible = "samsung,s5kjn5";
+		reg = <0x10>;
+
+		reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_mclk2_default &cam_reset2_default>;
+
+		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
+		assigned-clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		vddio-supply = <&vreg_l4n_1p8>;
+		vddd-supply = <&vreg_l1m_1p0>;
+		vdda-supply = <&vreg_l4m_2p2>;
+		vddio1p2-supply = <&vreg_l2n_1p2>;
+		afvdd-supply = <&vreg_l7m_2p8>;
+
+		port {
+			s5kjn5_out_ep: endpoint {
+				data-lanes = <1 2 3 4>;
+				link-frequencies = /bits/ 64 <1248000000>;
+				remote-endpoint = <&csiphy2_in_ep>;
+			};
+		};
+	};
+};
+
+&csiphy2 {
+	vdda-0p9-supply = <&vreg_l3d_0p8>;
+	vdda-1p2-supply = <&vreg_l1d_1p2>;
+
+	status = "okay";
+};
+
+&csiphy2_in_port {
+	csiphy2_in_ep: endpoint {
+		bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+		clock-lanes = <0>;
+		data-lanes = <1 2 3 4>;
+		remote-endpoint = <&s5kjn5_out_ep>;
+	};
+};
+
+&csiphy2_out_port {
+	csiphy2_out_ep: endpoint {
+		remote-endpoint = <&camss_csiphy2_inep>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index 9eb02fd09dab..c70cd39bcb75 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -1243,6 +1243,13 @@ &tlmm {
 			       <119 2>, /* SoCCP */
 			       <144 4>; /* CXM UART */
 
+	cam_reset2_default: cam-reset2-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	wlan_en: wlan-en-state {
 		pins = "gpio16";
 		function = "gpio";

-- 
2.34.1