Re: [PATCH 1/8] media: qcom: camss: Add streams API support for CSIPHY

[Bryan O'Donoghue]

On 11/09/2026 07:22, 
Gjorgji.Rosikopulos.gjorgji.rosikopulos@xxxxxxxxxxxxxxxx wrote:
> From: Gjorgji Rosikopulos <gjorgji.rosikopulos@xxxxxxxxxxxxxxxx>
>
> Add the V4L2 subdev streams API to the CSIPHY driver: a passthrough
> routing table (one VC per stream) and NO_STREAM_MIX routing validation.
>
> enable/disable_streams pad ops track active streams per pad via a
> per-pad enabled_streams[] bitmask, so that multiple source-pad
> consumers can share a single propagated sink stream without redundant
> or colliding propagation to the sensor. The shared D-PHY lanes are
> enabled once, on the transition from no active streams to at least
> one, and disabled once all streams have gone idle.
>
> This is opt-in per CSIPHY instance via the new streams_enable resource
> flag; no platform sets it yet, so CSIPHYs continue to use the legacy
> non-streams subdev ops unchanged.
>
> Signed-off-by: Gjorgji Rosikopulos <gjorgji.rosikopulos@xxxxxxxxxxxxxxxx>
+ static const struct v4l2_subdev_core_ops csiphy_core_ops = {
+       .s_power = csiphy_set_power,
++>>>>>>> media: qcom: camss: Add streams API support for CSIPHY
  };

  static const struct v4l2_subdev_video_ops csiphy_video_ops = {
@@@ -932,17 -981,17 +1133,30 @@@ int msm_csiphy_register_entity(struct c
  {
        struct v4l2_subdev *sd = &csiphy->subdev;
        struct media_pad *pads = csiphy->pads;
++<<<<<<< HEAD
 +      struct camss *camss = csiphy->camss;
 +      struct device *dev = camss->dev;
 +      int ret;
 +
 +      if (camss->legacy_phy)
 +              v4l2_subdev_init(sd, &csiphy_v4l2_ops_legacy);
 +      else
 +              v4l2_subdev_init(sd, &csiphy_v4l2_ops);
 +
 +      sd->internal_ops = &csiphy_v4l2_internal_ops;
++=======
+       struct device *dev = csiphy->camss->dev;
+       bool streams_api = csiphy->res->streams_enable;
+       int ret;
+
+       v4l2_subdev_init(sd, streams_api ? &csiphy_streams_v4l2_ops
+                                             : &csiphy_v4l2_ops);
+       sd->internal_ops = streams_api ? &csiphy_streams_internal_ops
+                                       : &csiphy_v4l2_internal_ops;
++>>>>>>> media: qcom: camss: Add streams API support for CSIPHY
        sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+       if (streams_api)
+               sd->flags |= V4L2_SUBDEV_FL_STREAMS;
        snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
                 MSM_CSIPHY_NAME, csiphy->id);
        sd->grp_id = CSIPHY_GRP_ID;
@@@ -968,22 -1025,16 +1190,35 @@@
        ret = v4l2_device_register_subdev(v4l2_dev, sd);
        if (ret < 0) {
                dev_err(dev, "Failed to register subdev: %d\n", ret);
++<<<<<<< HEAD
 +              goto media_entity_err;
 +      }
 +
 +      if (!IS_ERR(csiphy->phy)) {
 +              ret = phy_init(csiphy->phy);
 +              if (ret) {
 +                      dev_err(dev, "%s init fail %d\n", csiphy->name, 
ret);
 +                      v4l2_device_unregister_subdev(sd);
 +                      goto media_entity_err;
 +              }
 +      }
 +
 +      return 0;
 +
 +media_entity_err:
 +      media_entity_cleanup(&sd->entity);
++=======
+               goto err_v4l2_subdev_cleanup;
+       }
+
+       return 0;
+
+ err_v4l2_subdev_cleanup:
+       v4l2_subdev_cleanup(sd);
+ err_media_entity_cleanup:
+       media_entity_cleanup(&sd->entity);
+
++>>>>>>> media: qcom: camss: Add streams API support for CSIPHY