[PATCH v3 2/3] dt-bindings: input: touchscreen: add Nsiway NS2009

[Miotsuki Mizuno]

From: Mizuno Miotsuki <founder@xxxxxxxxxxx>

Describe the Nsiway NS2009 four-wire resistive touchscreen controller
with optional pen interrupt, power and reference supplies, and touch
resistance measurement properties. Include one complete example.

Signed-off-by: Mizuno Miotsuki <founder@xxxxxxxxxxx>
---
 .../input/touchscreen/nsiway,ns2009.yaml      | 78 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++
 2 files changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/nsiway,ns2009.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/nsiway,ns2009.yaml b/Documentation/devicetree/bindings/input/touchscreen/nsiway,ns2009.yaml
new file mode 100644
index 000000000000..caea15b5c5a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/nsiway,ns2009.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/nsiway,ns2009.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nsiway NS2009 resistive touchscreen controller
+
+maintainers:
+  - Mizuno Miotsuki <founder@xxxxxxxxxxx>
+
+description:
+  Nsiway NS2009 is an I2C four-wire resistive touchscreen controller with
+  a 12-bit ADC, an active-low pen interrupt and touch resistance measurement.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: nsiway,ns2009
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      Active-low pen interrupt output. Optional when the signal is not
+      connected.
+
+  wakeup-source:
+    type: boolean
+
+  vdd-supply:
+    description: Main power supply.
+
+  vref-supply:
+    description: External ADC reference voltage supply.
+
+  touchscreen-min-pressure:
+    minimum: 1
+    maximum: 4095
+    default: 80
+    description:
+      Minimum raw Z1 reading considered a touch. This is a contact detection
+      threshold, not a calibrated pressure value. Boards may require a higher
+      empirically determined threshold than the historical driver default.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "nsiway,ns2009";
+            reg = <0x48>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            wakeup-source;
+            vdd-supply = <&vdd>;
+            vref-supply = <&vref>;
+            touchscreen-x-plate-ohms = <400>;
+            touchscreen-min-pressure = <150>;
+            touchscreen-max-pressure = <4095>;
+            touchscreen-fuzz-pressure = <16>;
+            touchscreen-inverted-y;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index f53047aa8d3c..696f2badc49c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19467,6 +19467,12 @@ S:	Maintained
 F:	Documentation/core-api/symbol-namespaces.rst
 F:	scripts/nsdeps
 
+NSIWAY NS2009 TOUCHSCREEN CONTROLLER
+M:	Mizuno Miotsuki <founder@xxxxxxxxxxx>
+L:	linux-input@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/touchscreen/nsiway,ns2009.yaml
+
 NTB AMD DRIVER
 M:	Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
 M:	Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
-- 
2.56.0