[PATCH 3/3] MIPS: SGI-IP30: fix the defconfig defaults for the Bridge PROM and RTC

[Imre Kaloz]

The Bridge probe reads its part number from the 1-wire PROM and defers
until the SGI 1-wire master and DS250x slave are present, so without
them there is no PCI bus and no serial console.

The IP30 RTC is a DS1685-family part, but the defconfig, derived from
ip27_defconfig, has the M48T35 driver, so there is no RTC.

Enable the 1-wire drivers and select the DS1685 family.

Also drop four lines that savedefconfig removes, as CRYPTO_CAMELLIA,
CRYPTO_CTS and CRYPTO_HMAC are selected built-in and IPV6_SIT=m is the
default.

Fixes: bb2d63500b5c ("MIPS: config: Add ip30_defconfig")
Signed-off-by: Imre Kaloz <kaloz@xxxxxxxxxx>
---
 arch/mips/configs/ip30_defconfig | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/mips/configs/ip30_defconfig b/arch/mips/configs/ip30_defconfig
index 93eb90efe06e..a8b1a492f20c 100644
--- a/arch/mips/configs/ip30_defconfig
+++ b/arch/mips/configs/ip30_defconfig
@@ -40,7 +40,6 @@ CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_SIT=m
 CONFIG_IPV6_SIT_6RD=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
@@ -129,11 +128,14 @@ CONFIG_SERIAL_8250_IOC3=y
 CONFIG_NOZOMI=m
 CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_PTP_1588_CLOCK is not set
+CONFIG_W1=y
+CONFIG_W1_MASTER_SGI=y
+CONFIG_W1_SLAVE_DS250X=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_SGI_MFD_IOC3=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M48T35=y
+CONFIG_RTC_DRV_DS1685_FAMILY=y
 CONFIG_UIO=y
 CONFIG_UIO_AEC=m
 CONFIG_UIO_SERCOS3=m
@@ -162,15 +164,12 @@ CONFIG_NFS_FS=y
 CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_WP512=m
-- 
2.47.3