Re: [PATCH v7 10/11] arm64: dts: qcom: ipq5210: Add SPI node definitions

[Kathiravan Thirumoorthy]

On 10/12/2026 12:53 PM, Varadarajan Narayanan wrote:
> Add SPI node definition for the QUP SPI blocks present in IPQ5210.
>
> Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@xxxxxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/ipq5210.dtsi | 26 ++++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
> index fdfeedcf5618..cf1c9898ddb8 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
> @@ -418,6 +418,19 @@ qupv3: geniqup@1ac0000 {
>   			#address-cells = <2>;
>   			#size-cells = <2>;
>   
> +			spi0: spi@1a80000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x01a80000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clocks = <&gcc GCC_QUPV3_WRAP_SE0_CLK>;
> +				clock-names = "se";
> +				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +				assigned-clocks = <&gcc GCC_QUPV3_WRAP_SE0_CLK>;
> +				assigned-clock-rates = <50000000>;

opp-table here as well.

> +				status = "disabled";
> +			};
> +
>   			uart1: serial@1a84000 {
>   				compatible = "qcom,geni-debug-uart";
>   				reg = <0x0 0x01a84000 0x0 0x4000>;
> @@ -456,6 +469,19 @@ i2c1: i2c@1a8c000 {
>   				status = "disabled";
>   			};
>   
> +			spi1: spi@1a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x01a90000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clocks = <&gcc GCC_QUPV3_WRAP_SE4_CLK>;
> +				clock-names = "se";
> +				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> +				assigned-clocks = <&gcc GCC_QUPV3_WRAP_SE4_CLK>;
> +				assigned-clock-rates = <50000000>;
> +				status = "disabled";
> +			};
> +
>   			i2c2: i2c@1a94000 {
>   				compatible = "qcom,geni-i2c";
>   				reg = <0x0 0x01a94000 0x0 0x4000>;