[PATCH v2 24/53] MIPS: ip27_defconfig: enable the IOC3 MFD, its cell drivers and tg3

[Imre Kaloz]

CONFIG_SGI_MFD_IOC3 was unset, leaving the MFD core out of the built
kernel and the existing CONFIG_SGI_IOC3_ETH=y line unsatisfiable, since
that driver depends on it. Enable it with the 8250 and PS/2 cell
drivers, and enable tg3, which drives the Tezro's Gigabit Ethernet.

On IP27 the IOC3 sits behind a Bridge whose probe defers until its
1-wire PROM is readable, so also enable the SGI 1-wire master and the
DS250x slave.

Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip")
Fixes: 5dc76a96e95a ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection")
Signed-off-by: Imre Kaloz <kaloz@xxxxxxxxxx>
---
 arch/mips/configs/ip27_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index ac885ff5b712..4c8abe4611b8 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -140,6 +140,7 @@ CONFIG_ATL2=m
 CONFIG_ATL1E=m
 CONFIG_ATL1C=m
 CONFIG_B44=m
+CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_ENIC=m
 CONFIG_BE2NET=m
@@ -219,6 +220,7 @@ CONFIG_RTL8180=m
 CONFIG_WL1251=m
 CONFIG_WL12XX=m
 # CONFIG_INPUT is not set
+CONFIG_SERIO_SGI_IOC3=m
 CONFIG_SERIO_LIBPS2=m
 CONFIG_SERIO_RAW=m
 CONFIG_SERIO_ALTERA_PS2=m
@@ -229,6 +231,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_IOC3=y
 CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_ALI1535=m
@@ -250,6 +253,9 @@ CONFIG_I2C_PCA_PLATFORM=m
 CONFIG_I2C_SIMTEC=m
 CONFIG_I2C_TAOS_EVM=m
 CONFIG_I2C_STUB=m
+CONFIG_W1=y
+CONFIG_W1_MASTER_SGI=y
+CONFIG_W1_SLAVE_DS250X=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_VGA_ARB is not set
@@ -260,6 +266,7 @@ CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_SGI_MFD_IOC3=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_M48T35=y
 CONFIG_UIO=y
-- 
2.47.3