[PATCH] Bluetooth: hci_qca: Reopen port after power on for QCA2066

[Shuai Zhang]

QCA2066 requires the serial port to be reopened after the controller
is powered on, otherwise the host and the device run into RTS/CTS
synchronization issues. Call the existing qca_port_reopen() helper
for QCA_QCA2066 in the default power-on path, leaving the behaviour
for other default-path controllers unchanged.

Signed-off-by: Shuai Zhang <shuai.zhang@xxxxxxxxxxxxxxxx>
---
 drivers/bluetooth/hci_qca.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 7089e9b63..c24f4e6c9 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1873,6 +1873,12 @@ static int qca_power_on(struct hci_dev *hdev)
 			gpiod_set_value_cansleep(qcadev->bt_en, 1);
 			/* Controller needs time to bootup. */
 			msleep(150);
+
+			if (soc_type == QCA_QCA2066) {
+				ret = qca_port_reopen(hu);
+				if (ret)
+					break;
+			}
 		}
 	}
 
-- 
2.34.1