Re: [PATCH 5/5] arm64: dts: qcom: Add GP M/N clock controller node for SA8775P and QCS8300

[Taniya Das]

On 6/8/2026 1:02 PM, Luca Weiss wrote:
>> @@ -4412,6 +4412,20 @@ usb2_role_switch: endpoint {
>>  			};
>>  		};
>>  
>> +		gp_mn: clock-controller@88d3000 {
>> +			compatible = "qcom,clk-gp-mnd";
>> +			reg = <0x0 0x088d3000 0x0 0xc>;
>> +			clocks = <&gcc GCC_PDM_XO4_CLK>,
>> +				 <&gcc GCC_PDM_AHB_CLK>;
>> +			clock-names = "pdm_clk", "ahb_clk";
>> +			clock-output-names = "gp_mn_clk";
>> +			#clock-cells = <0>;
>> +			pinctrl-names = "active";
>> +			pinctrl-0 = <&gp_mn_active>;
>> +			assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
>> +			assigned-clock-rates = <4800000>;
>> +		};
> Am I missing something, or would this just configure gpio60 for all
> boards for this clock controller output? On QCM6490 Fairphone 5 this pin
> is connected to FP_3P3_EN, so it's definitely not unused.
> 
> Maybe disable them by default and let the board enable it, if it wants
> to make use of this clock?


yes I will keep it disabled and will let board enable them.

-- 
Thanks,
Taniya Das