[PATCH RFC 0/3] arm64: dts: qcom: nord: Enable SoCCP remoteproc support

[Anurag Pateriya]

This series adds device tree support for  SoCCP
(System on Chip Control Processor) on Nord platform.
SoCCP is used for hw fencing for display and other
use cases on Nord.

It has the same interrupts, SMP2P states, power domains
and clock as Kaanapali SoCCP, but its firmware ships without a separate
SoCCP devicetree image. It therefore takes a single firmware-name and
memory-region.

Prerequisite series:

[PATCH v5 0/7] arm64: dts: qcom: nord: Add remoteproc and PMIC support

https://lore.kernel.org/all/20261014063953.549379-1-shengchao.guo@xxxxxxxxxxxxxxxx/

[PATCH v2 0/2] Add binding and driver for Nord SoCCP

https://lore.kernel.org/all/20261014-soccp_driver_dtbinding-v2-0-09d9c1378e9e@xxxxxxxxxxxxxxxx/

Signed-off-by: Anurag Pateriya <anurag.pateriya@xxxxxxxxxxxxxxxx>
---
Anurag Pateriya (3):
      arm64: dts: qcom: nord: Add SoCCP remoteproc DT support for Nord
      arm64: dts: qcom: nord: Enable SoCCP on RRD board
      arm64: dts: qcom: nord: Enable SoCCP on Ride-Embedded board

 arch/arm64/boot/dts/qcom/nord-embedded.dtsi     |   9 ++
 arch/arm64/boot/dts/qcom/nord-ride-embedded.dts |   6 ++
 arch/arm64/boot/dts/qcom/nord-rrd.dts           |   6 ++
 arch/arm64/boot/dts/qcom/nord.dtsi              | 126 ++++++++++++++++++++++++
 4 files changed, 147 insertions(+)
---
base-commit: bf2089c6d55a812b133ba2dabe59413746c2328d
change-id: 20261015-nord-soccp-dt-bbc2d288c560

Best regards,
-- 
Anurag Pateriya <anurag.pateriya@xxxxxxxxxxxxxxxx>