[PATCH 10/10] ARM: dts: omap: dm8168-evm: enable MUSB multipoint support

[Ettore Chimenti]

From: Christopher Obbard <christopher.obbard@xxxxxxxxxx>

The DM8168 USB controllers are used in host mode and must advertise
multipoint support to the MUSB core. Without this the kernel disables
external hub support and warns:

    musb-hdrc: kernel must disable external hubs, please fix the
	configuration

On the affected board this also prevents devices from enumerating
reliably, with descriptor reads failing with -EPROTO:

    usb 1-1: device descriptor read/all, error -71

Set mentor,multipoint to the default value of 1 for both MUSB instances.
With this enabled, USB devices enumerate successfully on the host ports.

Signed-off-by: Christopher Obbard <christopher.obbard@xxxxxxxxxx>
Signed-off-by: Ettore Chimenti <ettore.chimenti@xxxxxxxxxx>
---
 arch/arm/boot/dts/ti/omap/dm8168-evm.dts | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/dm8168-evm.dts b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts
index a6d42766a496..4b4e4d850231 100644
--- a/arch/arm/boot/dts/ti/omap/dm8168-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts
@@ -198,17 +198,14 @@ &mmc1 {
 	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 };
 
-/* At least dm8168-evm rev c won't support multipoint, later may */
 &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_pins>;
-	mentor,multipoint = <0>;
 };
 
 &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
-	mentor,multipoint = <0>;
 };
 
 &sata {

-- 
2.56.0