Re: [PATCH] phy: rockchip: snps-pcie3: Raise the SRAM init timeout

[Sebastian Reichel]

Hi,

On Thu, Oct 15, 2026 at 03:02:55PM +0800, Shawn Lin wrote:
> The SRAM initialization of the PCIe3 PHY may take longer than the 500us
> currently allowed, especially on a slow power-up such as at low
> temperature. In that case the driver reports
> 
>   lock failed 0x..., check input refclk and power supply
> 
> even though the input refclk and power supply are fine.
> 
> Raise the timeout to 20ms and use a named constant for it, applied to
> both the RK3568 and RK3588 paths.
> 
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> ---
> 
>  drivers/phy/rockchip/phy-rockchip-snps-pcie3.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> index 4e8ffd1..bbbfd6d 100644
> --- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -19,6 +19,8 @@
>  #include <linux/regmap.h>
>  #include <linux/reset.h>
>  
> +#define RK_PCIE_SRAM_INIT_TIMEOUT		20000

#define RK_PCIE_SRAM_INIT_TIMEOUT_US        20 * USEC_PER_MSEC

Otherwise

Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>

Greetings,

-- Sebastian

> +
>  /* Register for RK3568 */
>  #define GRF_PCIE30PHY_CON1			0x4
>  #define GRF_PCIE30PHY_CON6			0x18
> @@ -127,7 +129,7 @@ static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
>  	ret = regmap_read_poll_timeout(priv->phy_grf,
>  				       GRF_PCIE30PHY_STATUS0,
>  				       reg, SRAM_INIT_DONE(reg),
> -				       0, 500);
> +				       0, RK_PCIE_SRAM_INIT_TIMEOUT);
>  	if (ret)
>  		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
>  		       __func__, reg);
> @@ -187,11 +189,11 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
>  	ret = regmap_read_poll_timeout(priv->phy_grf,
>  				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
>  				       reg, RK3588_SRAM_INIT_DONE(reg),
> -				       0, 500);
> +				       0, RK_PCIE_SRAM_INIT_TIMEOUT);
>  	ret |= regmap_read_poll_timeout(priv->phy_grf,
>  					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
>  					reg, RK3588_SRAM_INIT_DONE(reg),
> -					0, 500);
> +					0, RK_PCIE_SRAM_INIT_TIMEOUT);
>  	if (ret)
>  		dev_err(&priv->phy->dev, "lock failed 0x%x, check input refclk and power supply\n",
>  			reg);
> -- 
> 2.7.4
> 
>

Attachment: signature.asc
Description: PGP signature