[PATCH 00/10] clk: qcom: several fixes for stability on MSM8996/98 platforms
From: Dmitry Baryshkov
Date: Mon Oct 19 2026 - 09:46:19 EST
The MSM8996/MSM8998/SDM630/SDM660 platforms face several issues with
stability (e.g. setting running at the halved frequency after certain
frequency switches, resetting if run without clk_ignore_unused, failing
to scale GPU clock, etc.). In preparation for scaling core, cluster, CBF
and GPU voltages, fix these issues affecting platform stability.
Compared to other patches in the series the patches for MSM8996-Pro were
lightly tested, as a part of the larger series and only remotely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
Dmitry Baryshkov (10):
clk: qcom: gcc-msm8998: leave the GPU BIMC source and SNOC DVM clocks on
clk: qcom: gcc-msm8998: leave the MMSS QM clocks on
clk: qcom: gpucc-msm8998: set the droop detector bit in the right register
clk: qcom: clk-rcg2: forward the gfx3d rate request to the parent
clk: qcom: cpu-8996: move off the ACD leg while the PLL speeds up
clk: qcom: mmcc-msm8996: keep mmss_mmagic_maxi_clk always enabled
clk: qcom: cbf-msm8996: program the MSM8996 Pro post-divider
dt-bindings: clock: qcom,msm8996-apcc: add the MSM8996 Pro compatible
clk: qcom: cpu-8996: program the MSM8996 Pro droop code register
arm64: dts: qcom: msm8996pro: use the MSM8996 Pro CPU clock compatible
.../bindings/clock/qcom,msm8996-apcc.yaml | 7 ++-
arch/arm64/boot/dts/qcom/msm8996pro.dtsi | 4 ++
drivers/clk/qcom/clk-cbf-8996.c | 10 ++--
drivers/clk/qcom/clk-cpu-8996.c | 36 ++++++++---
drivers/clk/qcom/clk-rcg2.c | 21 +++----
drivers/clk/qcom/gcc-msm8998.c | 69 ++++------------------
drivers/clk/qcom/gpucc-msm8998.c | 2 +-
drivers/clk/qcom/mmcc-msm8996.c | 2 +-
8 files changed, 65 insertions(+), 86 deletions(-)
---
base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64
change-id: 20261019-msm8998-fix-clocks-6355058bcab0
Best regards,
--
With best wishes
Dmitry