Re: [PATCH v5 0/5] iio: pressure: dps310: add Zilltek ZTS8032

[Rupesh Majhi]

On Mon, Oct 19, 2026 at 11:36:15AM +0300, Paulius Zaleckas wrote:
> I have no DPS310, so patches 3-4 are untested on one.

Tested on a DPS310 on a BeagleBone Black, against iio/testing without
the series (dps310.c as a module on the board's 7.3-rc1 kernel). TMP_CFG
still reads 0x80 after probe, pressure is within 1 Pa of the datasheet
formula at every oversampling rate, and the buffer tests pass as before.

The board adds the sensor through sysfs, so for the OF table I also
booted each patch on QEMU rainier-bmc, which has an infineon,dps310
node. Same output as without the series.

Tested-by: Rupesh Majhi <zoone.rupert@xxxxxxxxx>