Re: [PATCH v3 6/7] arm64: dts: imx8dxl-evk: Move ACM MCLK pin to ACM pinctrl

[Liu Ying]

On Tue, Oct 20, 2026 at 04:12:56PM -0400, Frank.Li@xxxxxxxxxxx wrote:
> From: Frank Li <Frank.Li@xxxxxxx>
> 
> Move the IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 pin from the iomuxc hog
> group to the ACM pinctrl state.
> 
> The pin is used as the ACM MCLK output and should be configured by its
> actual consumer rather than unconditionally claimed by a pinctrl hog.
> Prepare for LCDIF support, which uses the same pin.
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)

Acked-by: Liu Ying <victor.liu@xxxxxxx>