[PATCH v3] bus: mhi: host: pci_generic: Update the default autosuspend_delay_ms as 5000ms

From: Slark Xiao

Date: Wed Oct 21 2026 - 07:00:35 EST


For some MHI devices in some specific scenarios, the default value
of autosuspend_delay_ms may not be enough to handle the last wake
event, potentially leading to device timeout or link drop issues.
This can lead to a runtime resume failure and a subsequent system
error:

[ 8749.089545] mhi mhi0: Resuming from non M3 state (SYS ERROR)
[ 8749.089573] mhi-pci-generic 0000:73:00.0: failed to resume device: -22
[ 8749.090218] mhi-pci-generic 0000:73:00.0: device recovery started
...
[ 8752.940324] mhi-pci-generic 0000:73:00.0: reset failed

Following Qualcomm's recommended settings from Windows and their
suggestion during case discussions, update the default autosuspend
delay to 5000ms for MHI devices.

Fixes: d3800c1dce24 ("bus: mhi: pci_generic: Add support for runtime PM")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
---
v3: update the commit message and the comment of the define
v2: define a autosuspend delay timeout and explain the reason
---
drivers/bus/mhi/host/pci_generic.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 7193a384cca4..17d51964b55f 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -21,6 +21,9 @@

#define MHI_POST_RESET_DELAY_MS 2000

+/* Timeout to accommodate a potential 'late wake-event' issue */
+#define MHI_AUTOSUSPEND_DELAY_MS 5000
+
#define HEALTH_CHECK_PERIOD (HZ * 2)

/* PCI VID definitions */
@@ -1483,7 +1486,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)

/* Allow runtime suspend only if both PME from D3Hot and M3 are supported */
if (pci_pme_capable(pdev, PCI_D3hot) && !(info->no_m3)) {
- pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, MHI_AUTOSUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
--
2.53.0