[PATCH net v2] net: sparx5: fix tx DCB index drift in fdma xmit

[Daniel Machon]

sparx5_fdma_xmit() advances dcb_index before checking that the FDMA is
done with the DCB, and does not undo the advance when the check fails.
Before commit f4aa7e361ae2 ("net: sparx5: use FDMA library for adding
DCB's in the tx path") the next DCB was always the one after last_dcb.
Since then dcb_index drifts one DCB further away from last_dcb on every
failed transmit.

While the ring is full, this drops frames even though completed DCBs
sit behind dcb_index. After a run of failures, dcb_index can also land
on last_dcb itself. Re-adding last_dcb loses the frame, because the
FDMA has already passed the tail of the chain, and that DCB is never
completed again.

Fix this by making dcb_index the next DCB to use, and advancing it only
after the DCB has been added, as the rx path does. dcb_index and
last_dcb now only move together, so dcb_index always points at the DCB
after last_dcb.

The issue was found by an AI code review agent. It was reproduced on a
sparx5 PCB135 board with a modified kernel that forces 63 consecutive
transmit failures. Afterwards, about 1 in 64 frames is lost for good.
With the fix, the same test loses no frames.

Fixes: f4aa7e361ae2 ("net: sparx5: use FDMA library for adding DCB's in the tx path")
Signed-off-by: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
---
Changes in v2:
- Advance dcb_index only after the DCB has been added, instead of
  rejecting last_dcb. This fixes the drift itself (AI review).
- Reword the subject and commit message to match.
- Link to v1: https://lore.kernel.org/r/20261020-sparx5-fdma-last-dcb-v1-1-fb9a956196dd@xxxxxxxxxxxxx
---
 drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c b/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c
index dbe86f937b21..15ec9b053824 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c
@@ -217,7 +217,6 @@ int sparx5_fdma_xmit(struct sparx5 *sparx5, u32 *ifh, struct sk_buff *skb,
 	struct fdma *fdma = &tx->fdma;
 	void *virt_addr;
 
-	fdma_dcb_advance(fdma);
 	if (!fdma_db_is_done(fdma_db_get(fdma, fdma->dcb_index, 0)))
 		return -EINVAL;
 
@@ -235,6 +234,8 @@ int sparx5_fdma_xmit(struct sparx5 *sparx5, u32 *ifh, struct sk_buff *skb,
 		     FDMA_DCB_STATUS_BLOCKO(0) |
 		     FDMA_DCB_STATUS_BLOCKL(skb->len + IFH_LEN * 4 + 4));
 
+	fdma_dcb_advance(fdma);
+
 	sparx5_fdma_reload(sparx5, fdma);
 
 	return NETDEV_TX_OK;

---
base-commit: 07bd391eb9572e74f073c49acef327611234f9bb
change-id: 20261019-sparx5-fdma-last-dcb-e2e8491b7d86

Best regards,
-- 
Daniel Machon <daniel.machon@xxxxxxxxxxxxx>